SRX 210 update

JunOS / Juniper / Netscreen
Wiadomość
Autor
terran666
fresh
fresh
Posty: 3
Rejestracja: 04 kwie 2016, 16:07

SRX 210 update

#1

#1 Post autor: terran666 »

Witam,

Mam problem z updatem junipera SRX 210

Wersja bez no-validate
/var/tmp/incoming-package.23736 268 kB 268 kBps
Package contains junos-12.1X46-D45.4.tgz ; renaming ...
Formatting alternate root (/dev/da0s2a)...
/dev/da0s2a: 297.9MB (610044 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 74.47MB, 4766 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
32, 152544, 305056, 457568
Installing package '/altroot/cf/packages/install-tmp/junos-12.1X46-D45.4-domestic' ...
verify-sig: cannot validate ./certs.pem
unhandled critical extension: /C=US/ST=CA/L=Sunnyvale/O=Juniper Networks/OU=Juniper CA/CN=PackageProductionRSA_2016/emailAddress=ca@juniper.net

Installation failed for package '/altroot/cf/packages/install-tmp/junos-12.1X46-D45.4-domestic'
Wersja z validate
/var/tmp/incoming-package.23114 329 kB 329 kBps
Package contains junos-12.1X46-D45.4.tgz ; renaming ...
NOTICE: Validating configuration against junos-12.1X46-D45.4.tgz.
NOTICE: Use the 'no-validate' option to skip this if desired.
Formatting alternate root (/dev/da0s2a)...
/dev/da0s2a: 297.9MB (610044 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 74.47MB, 4766 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
32, 152544, 305056, 457568
saving package file in /var/sw/pkg ...
mkdir: /var/sw: No such file or directory
cp: /var/sw/pkg/junos-12.1X46-D45.4.tgz: No such file or directory
Checking compatibility with configuration
Initializing...
Verified manifest signed by PackageProduction_10_4_0
Verified junos-10.4R3.4-domestic signed by PackageProduction_10_4_0
Using junos-12.1X46-D45.4-domestic from /altroot/cf/packages/install-tmp/junos-12.1X46-D45.4-domestic
Copying package ...
veriexec: cannot validate /cf/var/validate/chroot/junos/pkg/manifest.certs: unhandled critical extension: /C=US/ST=CA/L=Sunnyvale/O=Juniper Networks/OU=Juniper CA/CN=PackageProductionRSA_2016/emailAddress=ca@juniper.net
chroot: /usr/bin/hwdb_xml_parser: Authentication error
Unable to regenerate Hardware Database, skipping hardware database checks at install time
chroot: tar: Authentication error
Validating against /config/juniper.conf.gz
cp: /cf/var/validate/chroot/var/etc/resolv.conf and /etc/resolv.conf are identical (not copied).
cp: /cf/var/validate/chroot/var/etc/hosts and /etc/hosts are identical (not copied).
chroot: /usr/sbin/mgd: Authentication error
Validation failed
Validating against /config/rescue.conf.gz
chroot: /usr/sbin/mgd: Authentication error
Validation failed
Chciałbym, wykonać ten update bez restartu do wersji fabrycznej.
Proszę o informacje jak mógłbym tego dokonać oraz pomoc
Z góry dziękuję :)

michaliwanczuk
wannabe
wannabe
Posty: 187
Rejestracja: 17 kwie 2010, 21:48
Kontakt:

#2

#2 Post autor: michaliwanczuk »

a w jaki sposób instalujesz nową wersję junosa.
spróbuj przez FTP lub USB oraz danie do polecenia dodaj no-copy
Michał

terran666
fresh
fresh
Posty: 3
Rejestracja: 04 kwie 2016, 16:07

#3

#3 Post autor: terran666 »

Próbowałem z ftp'a oraz z pamięci lokalnej z opcja no-copy, ale nie pomaga. Z USB nie mam takiej możliwości.

michaliwanczuk
wannabe
wannabe
Posty: 187
Rejestracja: 17 kwie 2010, 21:48
Kontakt:

#4

#4 Post autor: michaliwanczuk »

właśnie zawierzyłem próbujesz podnieść z 10 do 12 zobacz czy jak zrobisz w pierwszej kolejności podnieś do 11 a następnie do 12
Michał

terran666
fresh
fresh
Posty: 3
Rejestracja: 04 kwie 2016, 16:07

#5

#5 Post autor: terran666 »

Dzięki, pomogła aktualizacja do wersji pośredniej :)

michaliwanczuk
wannabe
wannabe
Posty: 187
Rejestracja: 17 kwie 2010, 21:48
Kontakt:

#6

#6 Post autor: michaliwanczuk »

jak pomgłem kliknij pomógł
Michał

ODPOWIEDZ