Witam,
czy znacie program który rozczyta nagłówek protokołu ip?
chciałbym wiedzieć co jest wpisane w pole "Type of Service"
ja szukałem i nic dobrego nie znalazłem...
proszę o pomoc
Program do rozczytania nagłówka ip
Zgodnie z RFC:ongis pisze:a jest szansa abyś zrobił screeana i pokazał mi w którym miejscu to widać dokładnie?
Kod: Zaznacz cały
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Version| IHL |Type of Service| Total Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identification |Flags| Fragment Offset |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Time to Live | Protocol | Header Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Source Address |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Destination Address |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Options | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Kod: Zaznacz cały
Frame 3 (70 bytes on wire, 70 bytes captured)
Arrival Time: Jul 1, 2004 17:44:49.872282000
Time delta from previous packet: 0.087355000 seconds
Time since reference or first frame: 0.087704000 seconds
Frame Number: 3
Packet Length: 70 bytes
Capture Length: 70 bytes
Ethernet II, Src: 00:01:af:0c:06:96, Dst: 00:a0:80:00:5e:46
Destination: 00:a0:80:00:5e:46 (00:a0:80:00:5e:46)
Source: 00:01:af:0c:06:96 (00:01:af:0c:06:96)
Type: IP (0x0800)
Internet Protocol, Src Addr: 10.28.6.42 (10.28.6.42), Dst Addr: 10.28.6.44 (10.28.6.44)
Version: 4 <-- WERSJA
Header length: 20 bytes <-- DLUGOSC
Type of service: 0x00 (None) <-- ToS
000. .... = Precedence: routine (0)
...0 .... = Delay: Normal
.... 0... = Throughput: Normal
.... .0.. = Reliability: Normal
.... ..0. = Cost: Normal
Total Length: 56
Identification: 0xca40 (51776)
Flags: 0x00
0... = Reserved bit: Not set
.0.. = Don't fragment: Not set
..0. = More fragments: Not set
Fragment offset: 0
Time to live: 64
Protocol: SCTP (0x84)
Header checksum: 0x8f74 (correct)
Source: 10.28.6.42 (10.28.6.42)
Destination: 10.28.6.44 (10.28.6.44)
http://ccie.pl/album_pic.php?pic_id=406ongis pisze:a jest szansa abyś zrobił screeana i pokazał mi w którym miejscu to widać dokładnie?
Remember that the lab is just looking for reachability and not “optimal reachability”.