Mam problem z wysyłaniem danych netflow do kolektora (PRTG).
Zdaje się za platforma powinna obsługiwać netflow:
Kod: Zaznacz cały
sh ver
Cisco IOS Software, C3750E Software (C3750E-IPBASEK9-M), Version 15.0(2)SE2, RELEASE SOFTWARE (fc1)
.
.
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
.
.
System image file is "flash:/c3750e-ipbasek9-mz.150-2.SE2/c3750e-ipbasek9-mz.150-2.SE2.bin"
.
.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
.
.
cisco WS-C3750X-48 (PowerPC405) processor (revision F0) with 262144K bytes of memory.
Kod: Zaznacz cały
ip flow-cache timeout active 1
interface Vlan7
ip flow ingress
ip flow egress
ip address 192.168.1.1 255.255.255.0
ip flow-export source Vlan7
ip flow-export version 9
ip flow-export destination 192.168.1.2 9996
Kod: Zaznacz cały
sh ip flow export
Flow export v9 is enabled for main cache
Export source and destination details :
VRF ID : Default
Source(1) 192.168.10.170 (Vlan7)
Destination(1) 192.168.10.6 (9996)
Version 9 flow records
0 flows exported in 0 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
sh ip cache flow
IP packet size distribution (0 total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 278544 bytes
0 active, 4096 inactive, 0 added
0 ager polls, 0 flow alloc failures
Active flows timeout in 1 minutes
Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 33608 bytes
0 active, 1024 inactive, 0 added, 0 added to flow
0 alloc failures, 0 force free
1 chunk, 1 chunk added
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts