...próbuję ustawić na nim GVRP i napotykam problemy.
Mam 2 switche połączone 2 portami, konfiguracja poniżej:
Kod: Zaznacz cały
switch10#sh run
spanning-tree priority 0
port jumbo-frame
vlan database
vlan 2,5
exit
gvrp enable
ip igmp snooping
ipv6 mld snooping
ip igmp snooping vlan 1
ip igmp snooping vlan 2
ip igmp snooping vlan 5
ipv6 mld snooping vlan 1
ipv6 mld snooping vlan 2
ipv6 mld snooping vlan 5
interface vlan 1
ip address 10.10.10.10 255.255.255.0
no ip address dhcp
!
interface vlan 2
name TESTA
!
interface vlan 5
name TESTB
!
interface gigabitethernet51
channel-group 1 mode auto
!
interface gigabitethernet52
channel-group 1 mode auto
!
interface Port-channel1
description switch11
gvrp enable
no spanning-tree portfast
!
switch10#sh gvrp configuration
GVRP Feature is currently Enabled on the device.
Maximum VLANs: 4094
Port(s) GVRP-Status Registration Dynamic VLAN Timers(milliseconds)
Creation Join Leave Leave All
-------- ----------- ------------ ------------ ---- ----- ---------
gi51 Disabled Normal Enabled 200 600 10000
gi52 Disabled Normal Enabled 200 600 10000
Po1 Enabled Normal Enabled 200 600 10000
Po2 Disabled Normal Enabled 200 600 10000
switch10#
switch10#sh gvrp statistics
GVRP Statistics:
----------------
Legend:
rJE : Join Empty Received rJIn: Join In Received
rEmp : Empty Received rLIn: Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn: Join In Sent
sEmp : Empty Sent sLIn: Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn sLE sLA
-------- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
Po1 0 0 174 0 0 58 0 0 290 0 0 58
switch10#
Kod: Zaznacz cały
switch11#sh run
port jumbo-frame
vlan database
vlan 105
exit
gvrp enable
!
interface vlan 1
ip address 10.10.10.11 255.255.255.0
!
interface vlan 105
name test
!
!
interface gigabitethernet27
description "ge27"
channel-group 1 mode auto
!
interface gigabitethernet28
description "ge28"
channel-group 1 mode auto
!
interface Port-channel1
description switch10
gvrp enable
no spanning-tree portfast
exit
switch11#
switch11#sh gvrp configuration
GVRP Feature is currently Enabled on the device.
Maximum VLANs: 4094
Port(s) GVRP-Status Registration Dynamic VLAN Timers(milliseconds)
Creation Join Leave Leave All
-------- ----------- ------------ ------------ ---- ----- ---------
gi27 Disabled Normal Enabled 200 600 10000
gi28 Disabled Normal Enabled 200 600 10000
Po1 Enabled Normal Enabled 200 600 10000
Po2 Disabled Normal Enabled 200 600 10000
switch11#
switch11#sh gvrp statistics
GVRP Statistics:
----------------
Legend:
rJE : Join Empty Received rJIn: Join In Received
rEmp : Empty Received rLIn: Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn: Join In Sent
sEmp : Empty Sent sLIn: Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn sLE sLA
-------- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
Po1 0 0 412 0 0 106 0 0 364 0 0 129
switch11#
switch11#sh vlan
Created by: D-Default, S-Static, G-GVRP, R-Radius Assigned VLAN
Vlan Name Ports Created by
---- ----------------- --------------------------- ----------------
1 1 gi3-26,Po1-8 D
105 test Po1-8 S
switch11#
Jak widać powyżej na switch11 nie pojawiają się vlany 2 oraz 5
Dlaczego?