ERSPAN nie wysyła pakietów
: 27 paź 2017, 00:21
Witajcie. Mam dwa przełączniki Nexus 3064, BIOS: version 3.8.0, NXOS: version 7.0(3)I5(1). Przełączniki połączone są dedykowanym vlanem dla ERSPAN i nadana jest klasa /30 na obie strony vlanu. Komunikacja między nimi jest (ping,ssh).
Na przełączniku robiącym jako erspan-source monitoruje port e1/14:
input rate 90.82 Kbps, 14 pps; output rate 41.34 Mbps, 4.77 Kpps
origin ip ustawiony na adres z połączeniówki, dest-ip usatwiony na adres połączeniówki routera erspan-destination
session 1
---------------
description : erspan_4
type : erspan-source
state : up
erspan-id : erspan-id not specified
vrf-name : default
acl-name : acl-name not specified
ip-ttl : 255
ip-dscp : 0
destination-ip : x.x.x.221
origin-ip : x.x.x.222 (global)
source intf :
rx : Eth1/14
tx : Eth1/14
both : Eth1/14
source VLANs :
rx :
tx :
both :
filter VLANs : filter not specified
source fwd drops :
marker-packet : disabled
packet interval : 100
packet sent : 0
packet failed : 0
egress-intf : Eth1/11
PFC On Interfaces :
Na routerze erspan-destination ustawione source IP na adres połaczeniówki po stronie routera erspan-source oraz destination na interfejs e1/21
session 1
---------------
description : erspan_4
type : erspan-destination
state : up
source-ip : x.x.x.222
destination ports : Eth1/21
Konfiguracja interfejsu destination:
interface Ethernet1/21
description SPAN_10G
switchport monitor
Na interfejsie eth1/21 ruchu brak. W show monitor session 1 na routerze erspan-source widać, że nie wysyła żadnych pakietów. Nie bardzo wiem co mogę dalej diagnozować.
Na przełączniku robiącym jako erspan-source monitoruje port e1/14:
input rate 90.82 Kbps, 14 pps; output rate 41.34 Mbps, 4.77 Kpps
origin ip ustawiony na adres z połączeniówki, dest-ip usatwiony na adres połączeniówki routera erspan-destination
session 1
---------------
description : erspan_4
type : erspan-source
state : up
erspan-id : erspan-id not specified
vrf-name : default
acl-name : acl-name not specified
ip-ttl : 255
ip-dscp : 0
destination-ip : x.x.x.221
origin-ip : x.x.x.222 (global)
source intf :
rx : Eth1/14
tx : Eth1/14
both : Eth1/14
source VLANs :
rx :
tx :
both :
filter VLANs : filter not specified
source fwd drops :
marker-packet : disabled
packet interval : 100
packet sent : 0
packet failed : 0
egress-intf : Eth1/11
PFC On Interfaces :
Na routerze erspan-destination ustawione source IP na adres połaczeniówki po stronie routera erspan-source oraz destination na interfejs e1/21
session 1
---------------
description : erspan_4
type : erspan-destination
state : up
source-ip : x.x.x.222
destination ports : Eth1/21
Konfiguracja interfejsu destination:
interface Ethernet1/21
description SPAN_10G
switchport monitor
Na interfejsie eth1/21 ruchu brak. W show monitor session 1 na routerze erspan-source widać, że nie wysyła żadnych pakietów. Nie bardzo wiem co mogę dalej diagnozować.