mam odgrzebanego ASRa 1002F z zamiarem zestawienia kilku tuneli S2S.
Podczas konfiguracji tuneli dostaję:
Kod: Zaznacz cały
hardware crypto engine disabled
Kod: Zaznacz cały
%Software-forced reload
Kod: Zaznacz cały
asr_vpn#sh platform
Chassis type: ASR1002-F
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-SIP10-F ok 00:24:10
0/0 4XGE-BUILT-IN ok 00:20:29
0/1 SPA-2XOC3-POS ok 00:20:29
R0 ASR1002-RP1 ok, active 00:24:10
F0 ASR1002-ESP-F ok, active 00:24:10
P0 ASR1002-PWR-AC ok 00:23:13
P1 ASR1002-PWR-AC ok 00:23:12
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 07120202 12.2(33r)XNC
R0 08011017 12.2(33r)XNC
F0 07091401 12.2(33r)XNC
Kod: Zaznacz cały
asr_vpn#sh crypto eli
Hardware Encryption : INACTIVE
Number of hardware crypto engines = 1
CryptoEngine IOSXE-ESP(14) details: state = Initializing[/b]
Capability : DES, 3DES, AES, RSA, IPv6, GDOI, FAILCLOSE
IPSec-Session : 0 active, 32766 max, 0 failed
Kod: Zaznacz cały
asr_vpn#hw-module slot F0 start
asr_vpn#sh platform
Chassis type: ASR1002-F
[...]
F0 ASR1002-ESP-F booting 00:27:07
[...]
po chwili
F0 ASR1002-ESP-F init, active 00:28:47
az wreszcie:
F0 ASR1002-ESP-F ok, active 00:28:59
F0 07091401 12.2(33r)XNC
Kod: Zaznacz cały
asr_vpn#sh crypto eli
Hardware Encryption : INACTIVE
Number of hardware crypto engines = 1
CryptoEngine IOSXE-ESP(14) details: state = Initializing
Capability : DES, 3DES, AES, RSA, IPv6, GDOI, FAILCLOSE
Kod: Zaznacz cały
System image file is "bootflash:/asr1000rp1-advipservicesk9.03.10.02.S.153-3.S2-ext.b"
cisco ASR1002-F (2RU) processor with 1669939K/6147K bytes of memory.
Processor board ID FOX1415GMCC
4 Gigabit Ethernet interfaces
2 Packet over SONET interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7798783K bytes of eUSB flash at bootflash:.