Mam mały problem z conference bridge na Cisco 2921
wersja softu
Kod: Zaznacz cały
Version 15.5(3)M,
Sprzętowy CFB jest zarejestrowany na CUCM v11 i IOS widzi CFB jako aktywny.
Kod: Zaznacz cały
Profile ID = 3, Service = CONFERENCING, Resource ID = 3
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Total Number of Resources Configured : 2
Total Number of Resources Available : 2
Total Number of Resources Out of Service : 0
Total Number of Resources Active : 0
Maximum conference participants : 8
Codec Configuration: num_of_codecs:2
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Dspfarm Profile Configuration
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 1 40.2.0 UP N/A FREE conf 3 - - -
0 1 40.2.0 UP N/A FREE conf 3 - - -
0 1 40.2.0 UP N/A FREE xcode 2 - - -
0 1 40.2.0 UP N/A FREE mtp 1 - - -
0 1 40.2.0 UP N/A FREE mtp 1 - - -
Kiedy wykonam calla i zestawie konferencje to konferencja się zestawia ale nie ma audio
Kod: Zaznacz cały
BE6000S#sh sccp connections
sess_id conn_id stype mode codec sport rport ripaddr conn_id_tx
16777246 16777461 conf sendrecv g711u 16548 29286 172.31.242.134
16777246 16777460 conf sendrecv g711u 16546 17904 172.31.242.135
16777246 16777458 conf sendrecv g711u 16544 19430 172.31.242.136
dspfarm pokazuje, ze zasoby so wykorzystywane podczas zestawionej konferencji
Kod: Zaznacz cały
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 1 40.2.0 UP 1 USED conf 3 79 7402 7399
0 1 40.2.0 UP 1 USED conf 3 80 7401 7395
0 1 40.2.0 UP 1 USED conf 3 81 7400 7396
0 1 40.2.0 UP N/A FREE conf 3 - - -
0 1 40.2.0 UP N/A FREE xcode 2 - - -
0 1 40.2.0 UP N/A FREE mtp 1 - - -
0 1 40.2.0 UP N/A FREE mtp 1 - - -
Total number of DSPFARM DSP channel(s) 5
RTP pokazuje rowniez, ze sessje sa aktywne
Kod: Zaznacz cały
BE6000S#sh voip rtp connections
VoIP RTP Port Usage Information:
Max Ports Available: 8091, Ports Reserved: 101, Ports in Use: 3
Min Max Ports Ports Ports
Media-Address Range Port Port Available Reserved In-use
------------------------------------------------------------------------------
Global Media Pool 16384 32766 8091 101 3
------------------------------------------------------------------------------
VoIP RTP active connections :
No. CallId dstCallId LocalRTP RmtRTP LocalIP RemoteIP MPSS
1 148 149 16544 19430 172.31.240.27 172.31.242.136 NO
2 150 149 16546 17904 172.31.240.27 172.31.242.135 NO
3 151 149 16548 29286 172.31.240.27 172.31.242.134 NO
Found 3 active RTP connections
config
Kod: Zaznacz cały
dspfarm profile 3 conference
codec g711alaw
codec g711ulaw
maximum sessions 2
associate application SCCP
sccp local BVI1
sccp ccm 172.31.240.22 identifier 1 priority 1 version 7.0
sccp ip precedence 3
sccp
sccp ccm group 1
bind interface BVI1
associate ccm 1 priority 1
associate profile 3 register VG-IOS-CON
associate profile 2 register VG-IOS-TXC
associate profile 1 register VG-IOS-MTP
Pozdro,