Lab CISCO 2610 + 2612 + 2x WIC-2T

Wiadomość
Autor
hacluster
newbie
newbie
Posty: 1
Rejestracja: 15 mar 2021, 15:58

Lab CISCO 2610 + 2612 + 2x WIC-2T

#1

#1 Post autor: hacluster »

Sprzedam Laba do CCNA, CCNP.

W sklad Laba wchodzą:

Router CISCO 2610 z dołączonym do niego WIC-2T:

show version:

IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(21), RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.3(21), RELEASE SOFTWARE (fc2)

Router uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.123-21.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of memory
.
Processor board ID JAD054007Y2 (379021968)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router CISCO 2612 z dolączonym do niego WIC-2T:

IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(21), RELEASE SOFTWARE (fc2)

Technical Support:
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Mon 06-Nov-06 13:41 by ccai
Image text-base: 0x80008098, data-base: 0x81A403A4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.3(21), RELEASE SOFTWARE (fc2)

Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.123-21.bin"

cisco 2612 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory
.
Processor board ID JAD0438016W (3411833775)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Switch Catalyst 2950-12:

Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA8, RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 12-May-06 19:04 by myl
Image text-base: 0x80010000, data-base: 0x8067A000

ROM: Bootstrap program is C2950 boot loader

Switch uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6k2l2q4-mz.121-22.EA8.bin"

Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA8, RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 12-May-06 19:04 by myl
Image text-base: 0x80010000, data-base: 0x8067A000

ROM: Bootstrap program is C2950 boot loader

Switch uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6k2l2q4-mz.121-22.EA8.bin"

cisco WS-C2950-12 (RC32300) processor (revision P0) with 19959K bytes of memory.

Processor board ID FOC0815X352
Last reset from system-reset
Running Standard Image
12 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:F7:54:C3:00
Motherboard assembly number: 73-5782-13
Power supply part number: 34-0965-01
Motherboard serial number: FOC08153EWN
Power supply serial number: DAB08156FUJ
Model revision number: P0
Motherboard revision number: A0
Model number: WS-C2950-12
System serial number: FOC0815X352
Configuration register is 0xF

Dodatkowo dorzucam 2 kable DCE-DTE

Cena 50zł

Cichy83
newbie
newbie
Posty: 1
Rejestracja: 27 kwie 2021, 12:39

Re: Lab CISCO 2610 + 2612 + 2x WIC-2T

#2

#2 Post autor: Cichy83 »

50 zł za całość?

ODPOWIEDZ