IPS 5.x on VMWare howto

Pytania dt. certyfikacji CCIE oraz CCDE
Wiadomość
Autor
Seba
CCIE/CCDE Site Admin
CCIE/CCDE Site Admin
Posty: 6223
Rejestracja: 15 lip 2004, 20:35
Lokalizacja: Warsaw, PL

IPS 5.x on VMWare howto

#1

#1 Post autor: Seba »

Takie cos mozna wyszukac TUTAJ
Enjoy :-D
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
A. Einstein

Awatar użytkownika
Misiekm
wannabe
wannabe
Posty: 518
Rejestracja: 29 lis 2005, 17:31
Lokalizacja: Londyn

#2

#2 Post autor: Misiekm »

Good stuff :)

Awatar użytkownika
awo
CCIE
CCIE
Posty: 355
Rejestracja: 05 wrz 2004, 16:25
Lokalizacja: waw@pl
Kontakt:

#3

#3 Post autor: awo »

Dziala nawet pod windoze.
Trzeba tylko dopisac generowanie cidsZoneInfo na poczatku w rc.local
i zamiast bawic sie w if... i cpuinfo
na koncu if ... elseif zrobic statycznie 4 linijki dla modelu 4215

Co ciekawsze obraz vmware tylko 400mb zabiera ;-)

Awatar użytkownika
Sofcik
wannabe
wannabe
Posty: 1026
Rejestracja: 28 mar 2006, 15:29
Lokalizacja: Warszawa

#4

#4 Post autor: Sofcik »

W uzupełnieniu VMWare-stuff :
W sieci jest opis jak skonfigurować MARS model 20 w wersji 4.2.7 na emulowanym linuksie.

--
Pozdrawiam
Piotrek

Awatar użytkownika
Leve
wannabe
wannabe
Posty: 158
Rejestracja: 24 lis 2006, 21:32
Lokalizacja: Hell

#5

#5 Post autor: Leve »

Testowal ktos? Sprawnie chodzi?

Nie mam gdzie IPS przetrenowac :/

Awatar użytkownika
CiscoIT
wannabe
wannabe
Posty: 306
Rejestracja: 12 kwie 2006, 20:08
Lokalizacja: Krakow

#6

#6 Post autor: CiscoIT »

testowal. chodzi bardzo dobrze - zero problemow.

Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

#7

#7 Post autor: frontier »

Heja,

Czy ktos probowal inline z vlanami? Ja widze cos takiego:

Kod: Zaznacz cały

fro-sensor# sh interfaces gigabitEthernet0/1
MAC statistics from interface GigabitEthernet0/1
   Statistics From Subinterface 1
      Statistics From Vlan 101
         Total Packets Received On This Vlan = 0
         Total Bytes Received On This Vlan = 0
         Total Packets Transmitted On This Vlan = 0
         Total Bytes Transmitted On This Vlan = 0
      Statistics From Vlan 102
         Total Packets Received On This Vlan = 0
         Total Bytes Received On This Vlan = 0
         Total Packets Transmitted On This Vlan = 0
         Total Bytes Transmitted On This Vlan = 0
   Interface function = Sensing interface
   Description = 
   Media Type = TX
   Missed Packet Percentage = 0
   Inline Mode = Subinterfaced
   Pair Status = N/A
   Link Status = Up
   Link Speed = Auto_1000
   Link Duplex = Auto_Full
   Total Packets Received = 186
   Total Bytes Received = 16114
   Total Multicast Packets Received = 0
   Total Broadcast Packets Received = 0
   Total Jumbo Packets Received = 0
   Total Undersize Packets Received = 0
   Total Receive Errors = 0
   Total Receive FIFO Overruns = 0
   Total Packets Transmitted = 0
   Total Bytes Transmitted = 0
   Total Multicast Packets Transmitted = 0
   Total Broadcast Packets Transmitted = 0
   Total Jumbo Packets Transmitted = 0
   Total Undersize Packets Transmitted = 0
   Total Transmit Errors = 0
   Total Transmit FIFO Overruns = 0
   Dropped Packets From Vlans Not Mapped To Subinterfaces = 186
   Dropped Bytes From Vlans Not Mapped To Subinterfaces = 15370
Switch 3550 po drugiej stronie

Kod: Zaznacz cały

interface FastEthernet0/23
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 101,102
 switchport mode trunk
 spanning-tree portfast
end
niestety nic nie przechodzi :-( probowalem pod Xp i 2k, na roznych kartach, rozne ustawienia w VMware, i dupa...
Jeden konfig wart więcej niż tysiąc słów

ODPOWIEDZ