problem z asa 5505

Wszystko co nie mieści się w pozostałych kategoriach
Wiadomość
Autor
krzysiek250780
rookie
rookie
Posty: 11
Rejestracja: 15 mar 2010, 22:51

problem z asa 5505

#1

#1 Post autor: krzysiek250780 »

Witam i z góry dzięki za pomoc , nie jestem specjalistą od cisco ale trafiło w moje ręce urządzenie asa 5505 i mam z nim problem. Mianowicie coś chyba zrobiłem nie tak podczas resetu hasła i teraz za każdym razem jak go zrestartuje to pokazuje sie rommon #0> nie ładuje się normalnie. Zgodnie z instrukcją wykonałem następujące polecenie
confreg , następnie boot no i niby wstało wszystko normalnie ale jak go znowu zresetuję to się nie włącza tylko wraca do tego rommon #0> i nie wiem jak to na nim wymusić żeby po resecie zapamiętał coś co już de fakto działa , dzięki za pomoc.
poniżej wklejam to co widzę z konsoli

Kod: Zaznacz cały

rommon #1> confreg

Current Configuration Register: 0x00000040
Configuration Summary:
  boot ROMMON
  ignore system configuration

Do you wish to change this configuration? y/n [n]: y
enable boot to ROMMON prompt? y/n [n]:
enable TFTP netboot? y/n [n]:
enable Flash boot? y/n [n]:
select specific Flash image index? y/n [n]:
disable system configuration? y/n [n]: y
go to ROMMON prompt if netboot fails? y/n [n]:
enable passing NVRAM file specs in auto-boot mode? y/n [n]:
disable display of BREAK or ESC key prompt during auto-boot? y/n [n]:

Current Configuration Register: 0x00000040
Configuration Summary:
  boot ROMMON
  ignore system configuration

Update Config Register (0x40) in NVRAM...

rommon #2> boot
Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa721-k8.bin... Booting...
################################################################################                                                                              ################################################################################                                                                              ################################################################################                                                                              ################################################################################                                                                              ################################################################################                                                                              ################################################################################
256MB RAM

Total SSMs found: 0

Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 0019.0724.54d9
88E6095 rev 2 Ethernet @ index 07 MAC: 0019.0724.54d8
88E6095 rev 2 Ethernet @ index 06 MAC: 0019.0724.54d7
88E6095 rev 2 Ethernet @ index 05 MAC: 0019.0724.54d6
88E6095 rev 2 Ethernet @ index 04 MAC: 0019.0724.54d5
88E6095 rev 2 Ethernet @ index 03 MAC: 0019.0724.54d4
88E6095 rev 2 Ethernet @ index 02 MAC: 0019.0724.54d3
88E6095 rev 2 Ethernet @ index 01 MAC: 0019.0724.54d2
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 0019.0724.54da

Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : 50
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0

This platform has a Base license.

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CNlite-MC-Boot-Cisco-1.2
                             SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
                             IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.04
  --------------------------------------------------------------------------
                                 .            .
                                 |            |
                                |||          |||
                              .|| ||.      .|| ||.
                           .:||| | |||:..:||| | |||:.
                            C i s c o  S y s t e m s
  --------------------------------------------------------------------------

Cisco Adaptive Security Appliance Software Version 7.2(1)

  ****************************** Warning *******************************
  This product contains cryptographic features and is
  subject to United States and local country laws
  governing, import, export, transfer, and use.
  Delivery of Cisco cryptographic products does not
  imply third-party authority to import, export,
  distribute, or use encryption. Importers, exporters,
  distributors and users are responsible for compliance
  with U.S. and local country laws. By using this
  product you agree to comply with applicable laws and
  regulations. If you are unable to comply with U.S.
  and local laws, return the enclosed items immediately.

  A summary of U.S. laws governing Cisco cryptographic
  products may be found at:
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

  If you require further assistance please contact us by
  sending email to export@cisco.com.
  ******************************* Warning *******************************

Copyright (c) 1996-2006 by Cisco Systems, Inc.

                Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

                Cisco Systems, Inc.
                170 West Tasman Drive
                San Jose, California 95134-1706

Ignoring startup configuration as instructed by configuration register.
INFO: Converting  to disk0:/
Type help or '?' for a list of available commands.
ciscoasa>
EDIT: Do listingow konfiguracji, show, debug, etc uzywamy znacznikow

Kod: Zaznacz cały

 :!:
Seba
Ostatnio zmieniony 16 mar 2010, 00:03 przez krzysiek250780, łącznie zmieniany 1 raz.

Awatar użytkownika
gonte
CCIE
CCIE
Posty: 590
Rejestracja: 24 sty 2004, 10:19
Lokalizacja: Warszawa

#2

#2 Post autor: gonte »

Ustaw sobie config register na 0x1

Kod: Zaznacz cały

config-register 0x1
Powinno pomóc.

krzysiek250780
rookie
rookie
Posty: 11
Rejestracja: 15 mar 2010, 22:51

problem z asa 5505

#3

#3 Post autor: krzysiek250780 »

niestety to polocenie nie działa

rommon #1> config-register 0x1
Invalid or incorrect command. Use 'help' for help.

Awatar użytkownika
gonte
CCIE
CCIE
Posty: 590
Rejestracja: 24 sty 2004, 10:19
Lokalizacja: Warszawa

Re: problem z asa 5505

#4

#4 Post autor: gonte »

krzysiek250780 pisze:niestety to polocenie nie działa

rommon #1> config-register 0x1
Invalid or incorrect command. Use 'help' for help.
Ale to ustaw z poziomu systemu nie rommona.

krzysiek250780
rookie
rookie
Posty: 11
Rejestracja: 15 mar 2010, 22:51

problem z asa 5505

#5

#5 Post autor: krzysiek250780 »

cześć dzięki za pomoc wykonałem polecenie i zadziałało a mam jeszcze takie pytanie w jaki sposób przywrócić go do ustawień fabrycznych ?? jeszcze raz dzięki za pomoc , myślałem że to zresetowanie hasła przywróci go do fabrycznego ustawienia ale tak się nie stało .

Awatar użytkownika
bugi
wannabe
wannabe
Posty: 1345
Rejestracja: 09 lip 2008, 17:50
Lokalizacja: Warsaw Poland

Re: problem z asa 5505

#6

#6 Post autor: bugi »

krzysiek250780 pisze:cześć dzięki za pomoc wykonałem polecenie i zadziałało a mam jeszcze takie pytanie w jaki sposób przywrócić go do ustawień fabrycznych ?? jeszcze raz dzięki za pomoc , myślałem że to zresetowanie hasła przywróci go do fabrycznego ustawienia ale tak się nie stało .

Kod: Zaznacz cały

configure factory-default
CCIE RS#55541
"W ogóle, bracie, jeżeli nie masz na utrzymaniu rodziny, nie grozi ci głód, nie jesteś Tutsi ani Hutu i te sprawy, to wystarczy, że odpowiesz sobie na jedno zajebiście, ale to zajebiście, ważne pytanie: co lubię w życiu robić. A potem zacznij to robić..."
http://www.linkedin.com/in/mariuszbugaj

krzysiek250780
rookie
rookie
Posty: 11
Rejestracja: 15 mar 2010, 22:51

#7

#7 Post autor: krzysiek250780 »

dzięki za pomoc :)
między czasie przywróciłem go za pomocą ASDM.

ODPOWIEDZ