EHWIC-3G-HSPA+7 na 1921 - problem z T-Mobile

Wiadomość

gandziamen · #1

Mam problem który jest mi ciężko zdiagnozować - nie wiem gdzie leży powód takiego stanu. Nie jestem w stanie podłączyć się do T-mobile na zestawie EHWIC-3G-HSPA+7 w 1921. Próbowałem na 3 różnych SIMach i za każdym razem wywala mi informację:

Kod: Zaznacz cały

%CELLWAN-2-SIM_FAILURE: [Cellular0/0/0]: SIM read failed

Kod: Zaznacz cały

tw-rtr-waw3#sh cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) =
International Mobile Equipment Identity (IMEI) = 357115040304219
Integrated Circuit Card ID (ICCID) =
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3194209101007
Modem Status = Online
Current Modem Temperature = 24 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2

Profile Information
====================

Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = internet
Authentication = None
Username:
Password:

  * - Default profile

Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Emergency Only, Service Error = None
Current Service = Invalid
Packet Service = None
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = POL, Network = Era
Mobile Country Code (MCC) = 260
Mobile Network Code (MNC) = 2
Location Area Code (LAC) = 41102
Routing Area Code (RAC) = 1
Cell ID = 16766
Primary Scrambling Code = 407
PLMN Selection = Automatic

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10663
Current RSSI = -62 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0x197
        RSCP = -62 dBm, ECIO = -4 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = Removed
SIM User Operation Required = None
Number of CHV1 Retries remaining = 255

GPS Information
==========================

GPS Info
-------------
GPS State: GPS disabled

SMS Information
===============
SMS Service is not available
Number of outgoing SMS pending = 0

Error Information
=================

 Cached info is displayed

at!err

QDSP6                             ARM9 (not saved)
00 F 01 wl1m             06403    00   01 hsu_conf_sel_nv  00572
01   25 gsnvif           00245    01   01 hsu_conf_sel_nv  00616
02   E0 cmtask           01162    02   01 timer            03552
03   19 mmglbl           00392
04   19 gsnvif           00478
05   19 rr_init          01597
06   19 rr_init          01601
07   19 rrcdata          08026
08   01 gmmutil          01099
09   01 gmmutil          01118
10   01 gmmutil          01141
11   01 gmmutil          01156
12   01 gmmutil          01174
13   01 gmmutil          01198
14   16 rrcllcp          16550
15   03 rrccspf          02198
16   15 rrccsp           20686
17   11 gsdi             09787

18   01 gsdi_co          01538
19   17 cnlbs            03307

OK

at!gcdump

No crash data available

OK


Modem Crashdump Information
===========================
Modem crashdump logging: off

Żeby było ciekawiej włożyłem kartę SIM od PLAY i ta zaskoczyła od razu:

Kod: Zaznacz cały

tw-rtr-waw3#sh cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 260060093038875
International Mobile Equipment Identity (IMEI) = 357115040304219
Integrated Circuit Card ID (ICCID) = 89480610910020388757
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3194209101007
Modem Status = Online
Current Modem Temperature = 22 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2

Profile Information
====================

Profile 1 = ACTIVE* **
--------
PDP Type = IPv4
PDP address = 10.141.166.95
Access Point Name (APN) = internet
Authentication = None
Username:
Password:
        Primary DNS address = 89.108.202.21
        Secondary DNS address = 89.108.195.21

  * - Default profile

Data Connection Information
===========================
Data Transmitted = 564 bytes, Received = 460 bytes
Profile 1, Packet Session Status = ACTIVE
        IP address = 10.141.166.95
        Primary DNS address = 89.108.202.21
        Secondary DNS address = 89.108.195.21
        Negotiated QOS Parameters:
        Precedence = Normal Priority, Delay = Class 4
        Reliability = Unack GTP, LLC, Ack RLC, Protected data
        Peak = 256 kB/sec, Mean = 50000 kB/hr
        Traffic Class = Background
        Uplink Max = 1.8Mbps, Guaranteed = Subscribed
        Downlink Max = 7.2Mbps, Guaranteed = Subscribed
        Max SDU size = 1500 bytes
        SDU error ratio = 1E-4, BER = 4E-3
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA+ (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = POL, Network = Play
Mobile Country Code (MCC) = 260
Mobile Network Code (MNC) = 6
Location Area Code (LAC) = 12
Routing Area Code (RAC) = 12
Cell ID = 12158
Primary Scrambling Code = 130
PLMN Selection = Automatic
Registered PLMN =  , Abbreviated =
Service Provider = PLAY

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10836
Current RSSI = -72 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0x82
        RSCP = -73 dBm, ECIO = -4 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3

GPS Information
==========================

GPS Info
-------------
GPS State: GPS disabled

SMS Information
===============
Incoming Message Information
----------------------------
SMS stored in modem = 22
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 25
Storage records used = 23
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0

Outgoing Message Information
----------------------------
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status =     0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
  Reference Number =     0
  Result Code =          0x0
  Diag Code =            0x0 0x0 0x0 0x0 0x0

SMS Archive URL =

Error Information
=================

 Cached info is displayed

at!err

QDSP6                             ARM9 (not saved)
00 F 01 wl1m             06403    00   01 hsu_conf_sel_nv  00572
01   2A gsnvif           00245    01   01 hsu_conf_sel_nv  00616
02   E8 cmtask           01162    02   01 timer            03552
03   1A mmglbl           00392
04   1A gsnvif           00478
05   1A rr_init          01597
06   1A rr_init          01601
07   1A rrcdata          08026
08   01 gmmutil          01099
09   01 gmmutil          01118
10   01 gmmutil          01141
11   01 gmmutil          01156
12   01 gmmutil          01174
13   01 gmmutil          01198
14   16 rrcllcp          16550
15   03 rrccspf          02198
16   15 rrccsp           20686
17   11 gsdi             09787
18   01 gsdi_co          01538
19   18 cnlbs            03307

OK

at!gcdump

No crash data available

OK


Modem Crashdump Information
===========================
Modem crashdump logging: off

Próbowałem już tuningu fizycznego - bo może rzeczywiście nie stykała karta SIM - papierki i podgnanie styków nie pomaga.

Przeładowałem firmware na modemie (na taki sam co był - innego na stronach cisco nie znalazałem) - bez zmian.

Może ktoś się spotkał z czymś podobnym - może SIMy T-Mobile z jakiegoś względu nie będą działały na tym HWICu? Może jest potrzebny egzotyczny firmware/software? Na routerze mam:

Kod: Zaznacz cały

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.3(3)M, RELEASE SOFTWARE (fc2)

Będę wdzięczny za jakikilwiek punkt zaczepienia.

drake · #2

Hej,

pokaz co ci pokazuja komendy:

Kod: Zaznacz cały

sh cell 0 security
sh cell 0 network

Pozdruffka!

drake · #3

Sorki, nie zauwazylem ze wrzuciles "all".
U ciebie SIM z t-mobile pokazuje SIM Status = Removed, a powinien byc OK, cos nie tak z karta chyba. Sprawdzales w innym urzadzeniu? Moze karta jest zablokowana w t-mobile?

Pozdruffka!

Kyniu · #4

Ewentualnie jak stara jest karta - kiedyś były karty 5V, teraz na 3V.

gandziamen · #5

Karty T-Mobile: 2 sprzed roku i 1 kupiona wczoraj - microSIM. Play: ze 3 lata będzie.

Jest jakiś sposób na sprawdzenie jakie napięcia działają na kartach/modemie? Z dokumentacji modułu jest tylko ISO-7816-2 - czyli parametry fizyczne gniazda.

Wszystkie karty T-Mobile działają w telefonach bez problemu: dzwonią, internet działa - 2 z nich używane na co dzień.

Edit:

Znalazłem w broszurce od Sierra Wireless MC8705, że obsługuje napięcia 1,8V i 3V. Ale czy to coś zmienia? Karty microSIM są chyba 1,8V więc powinno zaskoczyć...
Tutaj broszurka którą znalazłem: http://www.acte.pl/files/attachments/si ... ules_6.pdf

Kyniu · #6

Szukaj różnic między tą kartą a tymi z Play - np. czy na wszystkich jest włączone sprawdzanie PIN? Czy próbowałeś wyłączyć PIN dla karty? Albo dla odmiany włączyć? Czy poza telefonami próbowałeś jej użyć w jakimś modemie?

gandziamen · #7

Przed chwilą włożyłem do modemu USB - działa. Nie jest zablokowana PINem. W momencie kiedy SIM jest niewidoczny nie ma nawet możliwości żeby spróbować ją odblokować. Nie działa żadna z 3 kart z T-Mobile:

Kod: Zaznacz cały

tw-rtr-waw3#cellular 0/0/0 gsm sim unlock 1111
!!!WARNING: SIM will be unlocked with pin=1111(4).
Do not enter new PIN to unlock SIM. Enter PIN that the SIM is configured with.
Call will be disconnected!!!
Are you sure you want to proceed?[confirm]
Unlock CHV1 failed: SIM status = Removed
tw-rtr-waw3#cellular 0/0/0 gsm sim lo
tw-rtr-waw3#cellular 0/0/0 gsm sim lock ?
  WORD  PIN (Length 4 to 8 digits)

tw-rtr-waw3#cellular 0/0/0 gsm sim lock 1111 ?
  <cr>

tw-rtr-waw3#cellular 0/0/0 gsm sim lock 1111
!!!WARNING: SIM will be locked with pin=1111(4).
Do not enter new PIN to lock SIM. Enter PIN that the SIM is configured with.
Call will be disconnected!!!
Are you sure you want to proceed?[confirm]
CHV1 status = Disabled
Lock CHV1 failed: SIM status = Removed
tw-rtr-waw3#cellular 0/0/0 gsm sim unlock 1111
!!!WARNING: SIM will be unlocked with pin=1111(4).
Do not enter new PIN to unlock SIM. Enter PIN that the SIM is configured with.
Call will be disconnected!!!
Are you sure you want to proceed?[confirm]
Unlock CHV1 failed: SIM status = Removed

tw-rtr-waw3#sh cellular 0/0/0 all | i SIM
SIM Status = Removed
SIM User Operation Required = None

drake · #8

Hej,
a jak wlozysz SIM z T-Mobile i uruchomisz router na nowo, sa jakies logi w buforze tego typu?

Kod: Zaznacz cały

%CELLWAN-2

Rozumiem, ze wszystkie karty sa regular SIM, a nie microSIM?

Pozdruffka!

gandziamen · #9

2 karty T-mobile są zwykłe - 1 jest zwykła z możliwością wyłamania do microSIM - głównie tą męczę

To jest cały log podczas bootowania:

Kod: Zaznacz cały

*Jan  2 00:00:02.855: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan  2 00:00:03.019: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = securityk9 and License = securityk9
*Jan 31 09:28:21.171: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0
*Jan 31 09:28:36.279: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized 
*Jan 31 09:28:36.283: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled 
*Jan 31 09:28:37.195: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Jan 31 09:28:37.195: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Jan 31 09:28:38.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Jan 31 09:28:38.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Jan 31 09:28:42.307: %CELLWAN-2-SIM_FAILURE: [Cellular0/0/0]: SIM read failed 
*Jan 31 09:28:42.387: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
*Jan 31 09:28:42.399: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
*Jan 31 09:28:46.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
*Jan 31 09:28:46.987: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 31 09:28:47.195: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*Jan 31 09:28:48.279: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*Jan 31 09:28:51.631: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.3(3)M, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 22-Jul-13 06:20 by prod_rel_team
*Jan 31 09:28:51.675: %SNMP-5-COLDSTART: SNMP agent on host tw-rtr-waw3 is undergoing a cold start
*Jan 31 09:28:51.687: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Jan 31 09:28:52.311: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jan 31 09:28:52.311: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jan 31 09:28:52.311: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jan 31 09:28:52.311: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF

gandziamen · #10

Teraz to już nic nie rozumiem. Włożyłem do EHWICa SIM AERO2. Niby kartę SIM widzi, ale nic się nie da z modemem zrobić:

Kod: Zaznacz cały

tw-rtr-waw3#sh cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) =
International Mobile Equipment Identity (IMEI) = 357115040304219
Integrated Circuit Card ID (ICCID) = 8948171200000896549
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3194209101007
Modem Status = Online
Current Modem Temperature = 28 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2

Profile Information
====================

Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = darmowy
Authentication = None
Username:
Password:

  * - Default profile

Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
        Inactivity Reason = PDP establish max timeout
Profile 2, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
        Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Emergency Only, Service Error = None
Current Service = Invalid
Packet Service = None
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = POL, Network = PLUS
Mobile Country Code (MCC) = 260
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 39003
Routing Area Code (RAC) = 110
Cell ID = 991
Primary Scrambling Code = 362
PLMN Selection = Automatic

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 900, Channel Number = 2963
Current RSSI = -91 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
        Primary Scrambling Code = 0x16A
        RSCP = -90 dBm, ECIO = -12 dBm


Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3

GPS Information
==========================

GPS Info
-------------
GPS State: GPS disabled

SMS Information
===============
Incoming Message Information
----------------------------
SMS stored in modem = 0
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 30
Storage records used = 0
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0

Outgoing Message Information
----------------------------
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status =     0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
  Reference Number =     0
  Result Code =          0x0
  Diag Code =            0x0 0x0 0x0 0x0 0x0

SMS Archive URL =

Error Information
=================


Modem Crashdump Information
===========================
Modem crashdump logging: off

Próba zmienienia lub dodania profilu wygląd tak:

Kod: Zaznacz cały

tw-rtr-waw3#cellular 0/0/0 gsm profile create 1 internet
Profile 1 already exists. Do you want to overwrite? [confirm]
Profile 1 will be overwritten with the following values:
PDP type = IPv4
APN = internet
Are you sure? [confirm]
Profile 1 written to modem
tw-rtr-waw3#cellular 0/0/0 gsm profile create 2 internet
Profile 2 will be created with the following values:
PDP type = IPv4
APN = internet
Are you sure? [confirm]
Profile 2 written to modem
tw-rtr-waw3#sh cell
tw-rtr-waw3#sh cellular 0/0
*Jan 31 14:47:39.499: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
tw-rtr-waw3#sh cellular 0/0/0 pro
tw-rtr-waw3#sh cellular 0/0/0 profile

Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = darmowy
Authentication = None
Username:
Password:

  * - Default profile
tw-rtr-waw3#
*Jan 31 14:47:45.499: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
tw-rtr-waw3#

Niby zwraca informację, że profil zapisany, ale jak się sprawdzi czy w rzeczywiści jest on zapisany to wyrzuca ten co był już podczas bootowania. No i nowe logi, które pojawiły się przy okazji AERO2:

Kod: Zaznacz cały

*Jan 31 14:38:52.407: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
*Jan 31 14:39:03.975: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:39:09.063: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:39:24.071: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:39:39.091: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:39:54.119: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:40:09.131: %CELL_MSG-1-MODEM_ACK_FAIL: [Cellular0/0/0] Modem Ack not received.
*Jan 31 14:41:19.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:25.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:31.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:37.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:43.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:49.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:41:55.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:42:01.331: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:42:33.383: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:42:39.383: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:44:43.643: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:45:23.139: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:46:04.159: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:47:39.499: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding
*Jan 31 14:47:45.499: %CELLWAN-2-SEND_TIMEOUT: Cellular0/0/0 not responding

Po wyjęciu karty AERO2 działa tak jak działało (czyli nie działa, ale we wcześniej opisywany sposób). Oczywiście przy takim zachowaniu AERO2 internet nie działa. Czy można uznać, że jest ten moduł uszkodzony? Zachowuj się raczej mało przewidywalnie.

Kyniu · #11

gandziamen pisze:Niby kartę SIM widzi
Kod: Zaznacz cały
International Mobile Subscriber Identity (IMSI) =

Skąd założenie że ją widzi?

gandziamen · #12

SIM widzi - ale nic więcej:

Kod: Zaznacz cały

Integrated Circuit Card ID (ICCID) = 8948171200000896549 

SIM Status = OK

Kyniu · #13

gandziamen pisze:SIM widzi - ale nic więcej:
Kod: Zaznacz cały
Integrated Circuit Card ID (ICCID) = 8948171200000896549 

SIM Status = OK

Niewiele już pamiętam z samej zasady i działania budowy GSM ale o ile mnie pamieć nie zawodzi bez IMSI nie ma mowy o zalogowaniu do HLR (Home Location Register). A jak widać z poprzedniego IMSI nie zostało odczytane z karty.

gandziamen · #14

W międzyczasie sprawdziłem działanie tego modułu z kartami wszystkich większych polskich operatorów. Żeby było ciekawiej, to udało mi się uruchomić tylko na karcie SIM z PLAY.

Na kartach z Plusa, T-Mobile i Orange objaw jest taki sam: karta jest niewidoczna - jakby jej fizycznie nie było.

Dodatkowo dziwny objaw z kartą AERO2 który opisywałem - resetowanie się modemu.

Tu jest chyba coś nie tak z modemem; jak to jednoznacznie zweryfikować - nie wiem.

M1siek · #15

Miałem podobny problem z kartą sim od Orange.
Okazało się że pomógł update softu (firmware) dla modułu EHWIC-3G-HSPA-U.
Obecnie lece na nich na sofcie K2_0_7_35AP lub 8775_h2_0_8_19 i wszystko w miarę fajnie działa

Oprogramowanie do modułu dostałem od mojego partnera Cisco (nigdzie nie mogłem jego znaleźć, a partner przysłał soft o który requestowałem).
Tutaj tabla:
http://www.cisco.com/en/US/prod/routers ... ml#~europe

Upgrade jest dosyć prosty najlepiej:
archive tar /xtract ftp://adres_IP/8775_h2_0_8_19.tar flash:

microcode reload cellular 0 0 gsm modem-provision flash:FWUpgradeConfigFile.txt

Powodzenia!