LWAPP 2602i nie chce dolaczyc do WLC

Wiadomość

ObiektywNy · #1

Witam ponownie, jak widac moje bolaczki z konrolerem nie skonczyly sie..

Podlaczylem nowiurki AP 2602i (controller base) do tego samego portu co mialem zdowngradeowany do Light Mode AP c1130
Obrazek

I teraz przy tej samej konfiguracji jak w watku Kontroler Cisco 2504 i DHCP kontroler dostaje IP address z DHC pool 101
ale WLC 2405 daje error

Kod: Zaznacz cały

#LWAPP-3-DISC_INTF_ERR2: spam_lrad.c:1533 Ignoring discovery request received on a wrong VLAN (101) on interface (13) in L3 LWAPP mode from AP 6c:41:6a:87:23:de

Error Message %LWAPP-3-DISC_INTF_ERR2: Ignoring discovery request received on a
wrong VLAN ([dec]) on interface ([int]) in L3 LWAPP mode
Explanation A discovery request from an AP was ignored because it was received on an invalid interface. Network configuration might be invalid.
Recommended Action Check the network configuration to ensure that packets from the AP are correctly routed.

Dodalem do DHCP pool opcje 60 i 43
Parametry TLV podalem nastepujace
Type: 1f
Lenght: 1x MGnT IP: 1* 04 => 04
Value: mgnt IP: 10.17.1.10 => 0a11010a
dalo mi option 43 hex 1f04.0a11.010a

Kod: Zaznacz cały

ip dhcp pool V101
 import all
 network 10.10.1.0 255.255.255.0
 domain-name indiantrailslibrary.org
 default-router 10.10.1.1 
 dns-server 10.50.1.15 10.50.1.16 
 option 60 ascii "Cisco AP c2600"
 option 43 hex 1f04.0a11.010a

Ale AP 2602i w consoli ciagle pokazuje w kolko

Kod: Zaznacz cały

%CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
Not in Bound state.
%CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
%CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
%DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.1.58, mask 255.255.255.0, hostname AP6c41.6a87.23de

[/quote]

kkub · #2

co pokazuje show interface summary na kontrolerze ?

wosiek28 · #3

A skad wziales type 1f? Sprobuj f104...

ObiektywNy · #4

kkub pisze:co pokazuje show interface summary na kontrolerze ?

Kod: Zaznacz cały

(Cisco Controller) >show interface summary

Number of Interfaces.......................... 5

Interface Name                   Port Vlan Id  IP Address        Type             Ap Mgr Guest
-------------------------------- ---- -------- ---------------         -------          ------ -----
int-vlan20                         LAG  20         10.20.1.2           Dynamic       No     No   
int-vlan30                         LAG  30         10.30.1.2           Dynamic       No     No   
management                         LAG  100        10.17.1.10          Static        Yes    No   
virtual                            N/A  N/A        1.1.1.1             Static        No     No   
wlc-lwapp                          LAG  101        10.10.1.10          Dynamic       No     No

Najciekawsze ze jak wejde do web interface MONITOR-> Statistics ->AP Join
to widze Base MAC address tego AP jego IP address oraz komunikat

Kod: Zaznacz cały

Last Error Occurred	- Lwapp discovery request rejected
Last Error Occurred Reason - Layer 3 discovery request not received on management VLAN

ObiektywNy · #5

Dodalem wpis do CAP-2602 z konsoli

Kod: Zaznacz cały

#lwapp ap controller ip address 10.17.1.10

I raptem zaskoczylo

Kod: Zaznacz cały

examining image...!
extracting info (284 bytes)
Image info:
    Version Suffix: k9w8-.152-2.JB
    Image Name: ap3g2-k9w8-mx.152-2.JB
    Version Directory: ap3g2-k9w8-mx.152-2.JB
    Ios Image Size: 1321472
    Total Image Size: 11438592
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: AP3G2
    Wireless Switch Management Version: 7.4.100.0
Extracting files...
ap3g2-k9w8-mx.152-2.JB/ (directory) 0 (bytes)
extracting ap3g2-k9w8-mx.152-2.JB/V2.bin (12826 bytes)!
extracting ap3g2-k9w8-mx.152-2.JB/Y2.bin (5830 bytes)
extracting ap3g2-k9w8-mx.152-2.JB/8004.img (1114148 bytes)!
*Mar  6 00:16:45.702: %CAPWAP-3-ERRORLOG: Go join a capwap controller 
*Jul  8 18:42:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.17.1.10 peer_port: 5246
*Jul  8 18:42:23.415: %CAPWAP-5-DT!!!!!!LSREQSUCC: DTLS connection created sucessfully peer_ip: 10.17.1.10 peer_port: 5246
*Jul  8 18:42:23.415: %CAPWAP-5-SENDJOIN: sending Join Request to 10.17.1.10
*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: Failed to proces!!!!!!s encrypted capwap packet from 10.17.1.10perform archive download capwap:/ap3g2 tar file
*Jul  8 18:42:23.419: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Jul  8 18:42:23.419: Loading file /ap3g2...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
extracting ap3g2-k9w8-mx.152-2.JB/X5.bin (61798 bytes)!!!!!
extracting ap3g2-k9w8-mx.152-2.JB/ap3g2-k9w8-xx.152-2.JB (9529187 bytes)!!!!!!!!!!!!!!!
*Jul  8 18:44:23.427: %CAPWAP-3-ERRORLOG: Invalid event 48 & state 10 combination.
*Jul  8 18:44:23.427: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 48, state 10
*Jul  8 18:44:23.427: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Jul  8 18:44:23.427: %CAPWAP-3-ERRORLOG: Failed to process timer message.!!!

AP zaladowal soft zrestartowal sie i teraz widze go na kontrolerze jao Joined

Ale musze dojsc czemu wyalio mi ten error:

Kod: Zaznacz cały

*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jul  8 18:42:23.415: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.