AP1260 Password Recovery w trybie Lightweight

Wszystko co się wiąże z technologiami bezprzewodowymi
ODPOWIEDZ
Wiadomość
Autor
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

AP1260 Password Recovery w trybie Lightweight

#1

#1 Post autor: frontier »

Hej,

Nie mogę zrobić password recovery, AP1260, wciskam guzik mode i niby wszystko pokazuje się na konsoli jak trzeba, ale Cisco/Cisco nie działa... jakieś pomysły?
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

Re: AP1260 Password Recovery w trybie Lightweight

#2

#2 Post autor: horac »

frontier pisze:Hej,

Nie mogę zrobić password recovery, AP1260, wciskam guzik mode i niby wszystko pokazuje się na konsoli jak trzeba, ale Cisco/Cisco nie działa... jakieś pomysły?
A stracil caly konfig ? hostname jaki ci sie zglasza ? jest obecnie zarejestrowany w WLC czy jakis banita ?
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

Re: AP1260 Password Recovery w trybie Lightweight

#3

#3 Post autor: frontier »

Nie jest zarejestrowany na moim WLC niestety :( Miałem go działającego jako Standalone, przekonwertowałem do Lightweight i teraz nie mogę się do niego dostać ani zarejestrować w WLC. Hostname to APmac.address...
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

Re: AP1260 Password Recovery w trybie Lightweight

#4

#4 Post autor: horac »

frontier pisze:Nie jest zarejestrowany na moim WLC niestety :( Miałem go działającego jako Standalone, przekonwertowałem do Lightweight i teraz nie mogę się do niego dostać ani zarejestrować w WLC. Hostname to APmac.address...
Glupie pytanie a malym login cisco i duzym pass Cisco probowales ?
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

Re: AP1260 Password Recovery w trybie Lightweight

#5

#5 Post autor: frontier »

horac pisze:
frontier pisze:Nie jest zarejestrowany na moim WLC niestety :( Miałem go działającego jako Standalone, przekonwertowałem do Lightweight i teraz nie mogę się do niego dostać ani zarejestrować w WLC. Hostname to APmac.address...
Glupie pytanie a malym login cisco i duzym pass Cisco probowales ?
Tak, próbowałem i nic :(
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

Re: AP1260 Password Recovery w trybie Lightweight

#6

#6 Post autor: horac »

frontier pisze:
horac pisze:
frontier pisze:Nie jest zarejestrowany na moim WLC niestety :( Miałem go działającego jako Standalone, przekonwertowałem do Lightweight i teraz nie mogę się do niego dostać ani zarejestrować w WLC. Hostname to APmac.address...
Glupie pytanie a malym login cisco i duzym pass Cisco probowales ?
Tak, próbowałem i nic :(
Wez go moze jeszcze raz do standalone a potem ponownie do Light

Ja mam 1242 i soft c1240-rcvk9w8-tar.124-25e.JAP1.tar

Sprobuj zapodac podobny soft pod 1260 i zobacz wtedy
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

Re: AP1260 Password Recovery w trybie Lightweight

#7

#7 Post autor: frontier »

horac pisze: Wez go moze jeszcze raz do standalone a potem ponownie do Light

Ja mam 1240 i soft c1240-rcvk9w8-tar.124-25e.JAP1.tar

Sprobuj zapodac podobny soft pod 1260 i zobacz wtedy
No ale jak... nie mogę się do niego dostać przecież :)
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

Re: AP1260 Password Recovery w trybie Lightweight

#8

#8 Post autor: horac »

frontier pisze:
horac pisze: Wez go moze jeszcze raz do standalone a potem ponownie do Light

Ja mam 1240 i soft c1240-rcvk9w8-tar.124-25e.JAP1.tar

Sprobuj zapodac podobny soft pod 1260 i zobacz wtedy
No ale jak... nie mogę się do niego dostać przecież :)
No ta :P cholera no to ja nie widze innej opcji jak zabawa z tym manualnym przyciskiem. Probowales powtorzyc procedure ?
Ostatnio zmieniony 01 kwie 2015, 15:11 przez horac, łącznie zmieniany 1 raz.
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

Re: AP1260 Password Recovery w trybie Lightweight

#9

#9 Post autor: frontier »

horac pisze:
frontier pisze:
horac pisze: Wez go moze jeszcze raz do standalone a potem ponownie do Light

Ja mam 1240 i soft c1240-rcvk9w8-tar.124-25e.JAP1.tar

Sprobuj zapodac podobny soft pod 1260 i zobacz wtedy
No ale jak... nie mogę się do niego dostać przecież :)
To nie masz konsoli ?
Hmm... no piszę właśnie że próbuję zrobić password recovery bo nie mogę się dostać do APka... oczywiście że przez console.
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

Re: AP1260 Password Recovery w trybie Lightweight

#10

#10 Post autor: horac »

frontier pisze:
horac pisze:
frontier pisze: No ale jak... nie mogę się do niego dostać przecież :)
To nie masz konsoli ?
Hmm... no piszę właśnie że próbuję zrobić password recovery bo nie mogę się dostać do APka... oczywiście że przez console.
Zrob mu again reset do factory tym przyciskiem zgodnie z procedura. Moze cos z konfigiem jest nie tak

Moze pominales ten step gdzie trzeba odlaczyc AP od zasilania, podlaczyc ponownie i dopiero wcisnac Mode
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

Re: AP1260 Password Recovery w trybie Lightweight

#11

#11 Post autor: frontier »

horac pisze:
Zrob mu again reset do factory tym przyciskiem zgodnie z procedura. Moze cos z konfigiem jest nie tak

Moze pominales ten step gdzie trzeba odlaczyc AP od zasilania, podlaczyc ponownie i dopiero wcisnac Mode
Zrobiłem tak ze 3 razy i ciągle to samo, log poniżej:

Kod: Zaznacz cały

IOS Bootloader - Starting system.
FLASH CHIP:  Numonyx P33
Checking for Over Erased blocks
.........................................................
Xmodem file system is available.

DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000031, 0x00000218

PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
64bit PCIE devices
PCIEx: initialization done
flashfs[0]: 38 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 6927872
flashfs[0]: Bytes available: 24812032
flashfs[0]: flashfs fsck took 11 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 70:81:05:e7:a7:89
Ethernet speed is 100 Mb - FULL duplex
button is pressed, wait for button to be released...
button pressed for 15 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/ap3g1-k9w8-mx.124-23c.JA10/ap3g1-k9w8-mx.124-23c.JA10"...################

File "flash:/ap3g1-k9w8-mx.124-23c.JA10/ap3g1-k9w8-mx.124-23c.JA10" uncompressed and installed, entry point: 0x4000
executing...
enet halted

IOS Secondary Bootloader - Starting system.
FLASH CHIP:  Numonyx P33
Checking for Over Erased blocks
........................................................................
Xmodem file system is available.

DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000031, 0x00000218

PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
64bit PCIE devices
PCIEx: initialization done
flashfs[0]: 38 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 6927872
flashfs[0]: Bytes available: 24812032
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 70:81:05:e7:a7:89
Creating Test Kernel diagnostic commands
Radio 0 : Vendor 0x11AB, Device 0x8324
Radio 1 : Vendor 0x11AB, Device 0x8350
Radio 2 : Vendor 0xC1A1, Device 0x2408
Radio 3 : Vendor 0xCD62, Device 0x3EB7
******** AUTOMATIC DDR CALIBRATION UPGRADE LOGIC *********
=== 1. Is original FCS bootloader in BS:?  If not, skip upgrade ===
    ---> original FCS bootloader not detected -- skip upgrade
Boot CMD: 'boot  flash:/ap3g1-k9w8-mx.124-23c.JA10/ap3g1-k9w8-xx.124-23c.JA10'
Loading "flash:/ap3g1-k9w8-mx.124-23c.JA10/ap3g1-k9w8-xx.124-23c.JA10"...#################

File "flash:/ap3g1-k9w8-mx.124-23c.JA10/ap3g1-k9w8-xx.124-23c.JA10" uncompressed and installed, entry point: 0x4000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C1260 Software (AP3G1-K9W8-M), Version 12.4(23c)JA10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 20-Mar-15 11:04 by prod_rel_team


Proceeding with system init

Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP:  Numonyx P33
Checking for Over Erased blocks
....................................................................................

flashfs[1]: 38 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 31481856
flashfs[1]: Bytes used: 6927872
flashfs[1]: Bytes available: 24553984
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.

Ethernet speed is 100 Mb - FULL duplex

Radio0  present 8364B 8000 B8020000 0 B8030000 10
Radio1  present 8364B 8000 B0020000 0 B0030000 C
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1262N-E-K9    (PowerPC460exr) processor (revision A0) with 81910K/49152K bytes of memory.
Processor board ID FCZ1546J0LZ
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
LWAPP image version 7.0.220.0
1 Gigabit Ethernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 70:81:05:E7:A7:89
Part Number                          : 73-12175-05
PCA Assembly Number                  : 800-32268-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC15326PHG
Top Assembly Part Number             : 800-33866-01
Top Assembly Serial Number           : FCZ1546J0LZ
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1262N-E-K9   
% Please define a domain-name first.
flash:/mesh_start_cfg.txt: No such file or directoryThe filesystem containing the variables may not be initialized yet.



Press RETURN to get started!


*Mar  1 00:00:09.418: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar  1 00:00:09.430: *** CRASH_LOG = YES

*Mar  1 00:00:09.434: 64bit PCIE devicesSecurity Core found.
Base Ethernet MAC address: 70:81:05:E7:A7:89

*Mar  1 00:00:12.331: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:13.130: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar  1 00:00:13.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:15.863: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar  1 00:00:15.926: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1025 messages)

*Mar  1 00:00:15.942:  status of voice_diag_test from WLC is false
*Mar  1 00:00:15.955: AP identified to be in Fenway/Huck Jr/1240/1130 configuration

*Mar  1 00:00:18.153: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1260 Software (AP3G1-K9W8-M), Version 12.4(23c)JA10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 20-Mar-15 11:04 by prod_rel_team
*Mar  1 00:00:18.153: %SNMP-5-COLDSTART: SNMP agent on host AP7081.05e7.a789 is undergoing a cold start
*Jun 24 07:02:10.025: Warning: Failed to run startup script

*Jun 24 07:02:10.047: %MESH-6-BVI_CREATED: Mesh BVI1 interface created
*Jun 24 07:02:10.059: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 24 07:02:10.141: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jun 24 07:02:10.141: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 24 07:02:10.298: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Jun 24 07:02:10.962: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jun 24 07:02:11.141: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jun 24 07:02:11.141: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jun 24 07:02:12.047: %LINK-3-UPDOWN: Interface BVI1, changed state to down
flash:/mesh_start_cfg.txt: No such file or directoryThe filesystem containing the variables may not be initialized yet.

*Jun 24 07:02:25.046: No Mesh startup file found

*Jun 24 07:02:28.908: Logging LWAPP message to 255.255.255.255.

*Jun 24 07:02:37.084: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source
*Jun 24 07:02:37.172: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Jun 24 07:02:37.257: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 24 07:02:37.927: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh adjacency state machine started
*Jun 24 07:02:37.927: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Jun 24 07:02:38.088: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jun 24 07:02:38.185: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jun 24 07:02:59.089: %CDP_PD-4-POWER_OK: Full power - INJECTOR_DETECTED_MULTIPLE_MACS_ON_HUB inline power source
*Jun 24 07:03:15.302: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Jun 24 07:03:17.243: %LINK-3-UPDOWN: Interface BVI1, changed state to up
*Jun 24 07:03:18.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jun 24 07:03:20.363: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 24 07:03:20.376: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jun 24 07:03:20.461: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !! 
*Jun 24 07:03:20.461:  status of voice_diag_test from WLC is false
*Jun 24 07:03:20.467: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 24 07:03:20.483: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 24 07:03:29.228: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Jun 24 07:03:29.228: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.42.230, mask 255.255.255.0, hostname AP7081.05e7.a789

*Jun 24 07:03:29.291: %MESH-6-CAPWAP_RESTART: Mesh Capwap re-started
*Jun 24 07:03:30.461: %CAPWAP-3-ERRORLOG: Invalid event 29 & state 4 combination.
*Jun 24 07:03:30.461: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message.
*Jun 24 07:03:30.461: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Jun 24 07:03:30.461: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Jun 24 07:03:30.461: %CAPWAP-3-ERRORLOG: Discovery interval timer expiry handler failed.
*Jun 24 07:03:34.352: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 24 07:03:34.365: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jun 24 07:03:34.450: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (4.2.2.2) [OK]

*Jun 24 07:03:34.465: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 24 07:03:35.491:  status of voice_diag_test from WLC is false
*Jun 24 07:03:35.497: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 24 07:03:35.507: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 24 07:03:35.519: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:20.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:21.000: %CAPWAP-5-CHANGED: CAPWAP changed state to  
*Apr  1 13:19:21.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:21.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:21.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:21.522: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:21.522: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:21.522: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr  1 13:19:21.525: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:21.535: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:26.524: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:26.524: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:19:26.524: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:19:26.524: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:19:20.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:20.003: %CAPWAP-5-CHANGED: CAPWAP changed state to  
*Apr  1 13:19:20.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:20.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:20.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:20.525: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:20.525: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:20.525: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr  1 13:19:20.531: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:20.541: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:20.556: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:25.527: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:25.527: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:19:25.527: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:19:25.527: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:19:25.589: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:19:25.589: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:19:25.596: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr  1 13:19:25.678:  status of voice_diag_test from WLC is false
*Apr  1 13:19:25.684: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:25.700: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:42.000: %CAPWAP-5-CHANGED: CAPWAP changed state to  
*Apr  1 13:19:42.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:42.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:42.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:42.525: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:42.525: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:42.525: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr  1 13:19:42.528: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:42.537: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:42.550: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:47.527: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:47.527: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:19:47.527: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:19:47.527: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:19:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:19:42.003: %CAPWAP-5-CHANGED: CAPWAP changed state to  
*Apr  1 13:19:42.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:19:42.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:42.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:19:47.527: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:19:47.527: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:19:47.527: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:19:47.527: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:19:47.589: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:19:47.589: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:19:47.596: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr  1 13:19:47.678:  status of voice_diag_test from WLC is false
*Apr  1 13:19:47.684: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:19:47.700: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:20:04.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:20:04.000: %CAPWAP-5-CHANGED: CAPWAP changed state to  
*Apr  1 13:20:04.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:20:04.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:20:04.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Apr  1 13:20:04.525: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:20:04.525: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:20:04.525: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr  1 13:20:04.528: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:20:04.537: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:20:04.553: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

User Access Verification

Username: Cisco
Password: 
*Apr  1 13:20:09.527: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:20:09.527: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:20:09.527: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:20:09.527: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:20:04.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.42.45 peer_port: 5246
*Apr  1 13:20:04.003: %CAPWAP-5-
CHANGED: CAPWAP changed state to  
*Apr  1 13:20:04.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Apr  1 13:20:04.012: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:20:04.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
% Authentication failed

Username: 
*Apr  1 13:20:09.527: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.42.45
*Apr  1 13:20:09.527: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.42.45
*Apr  1 13:20:09.527: %DTLS-5-PEER_DISCONNECT: Peer 192.168.42.45 has closed connection.
*Apr  1 13:20:09.527: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.42.45:5246
*Apr  1 13:20:09.593: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:20:09.593: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr  1 13:20:09.599: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Apr  1 13:20:09.681:  status of voice_diag_test from WLC is false
*Apr  1 13:20:09.687: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Apr  1 13:20:09.703: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

#12

#12 Post autor: horac »

%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1262N-E-K9

Nie wgrales recovery, a to z niego sie zmiane do Light robi.

Nie wiem czy AP ma jakas namiastke rommonu, zebys przez Z-modem podmienil image
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

#13

#13 Post autor: frontier »

horac pisze:%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1262N-E-K9

Nie wgrales recovery, a to z niego sie zmiane do Light robi.

Nie wiem czy AP ma jakas namiastke rommonu, zebys przez Z-modem podmienil image
A jest ROMMON, uff :)
Jeden konfig wart więcej niż tysiąc słów
Na górę
horac

#14

#14 Post autor: horac »

frontier pisze:
horac pisze:%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1262N-E-K9

Nie wgrales recovery, a to z niego sie zmiane do Light robi.

Nie wiem czy AP ma jakas namiastke rommonu, zebys przez Z-modem podmienil image
Czyli AP do kasacji? :(
Mozesz mi dac :) Nie no.. ponizej tratwa ratunkowa

https://supportforums.cisco.com/documen ... s-recovery
Na górę
Awatar użytkownika
frontier
wannabe
wannabe
Posty: 1861
Rejestracja: 16 lis 2004, 13:55
Lokalizacja: Edinburgh

#15

#15 Post autor: frontier »

horac pisze:
frontier pisze:
horac pisze:%Error opening flash:/ap3g1-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1262N-E-K9

Nie wgrales recovery, a to z niego sie zmiane do Light robi.

Nie wiem czy AP ma jakas namiastke rommonu, zebys przez Z-modem podmienil image
Czyli AP do kasacji? :(
Mozesz mi dac :) Nie no.. ponizej tratwa ratunkowa

https://supportforums.cisco.com/documen ... s-recovery
Heh to nie mój :) już jadę z koksem, dzięki.
Jeden konfig wart więcej niż tysiąc słów
Na górę
ODPOWIEDZ

Wróć do „Wireless”