Strona 1 z 1

HA SKU

: 16 cze 2017, 10:32
autor: PatrykW
Dzien dobrym

Czy z ktos z was posiada WLC 5508 oraz konfiguracje HA SKU ? (Bez SSO)
Nie jestem za bardzo przekonany co do tej konfiguracji, szczegolnie ze (Redundancy State = N/A ), czy nie powinno byc "HA SKU" ?


Primary
(Cisco Controller) >show redundancy summary
Redundancy Mode = SSO DISABLED
Local State = ACTIVE
Peer State = N/A
Unit = Primary
Unit ID = 54:75:xxxxxx
Redundancy State = N/A
Mobility MAC = 54:75:xxxxxx
Secondary
(Cisco Controller) >show redundancy summary
Redundancy Mode = SSO DISABLED
Local State = ACTIVE
Peer State = N/A
Unit = Secondary
Unit ID = 3C:08:xxxxxx
Redundancy State = N/A
Mobility MAC = 3C:08:xxxxxx

Pzdr
P.

Re: HA SKU

: 29 cze 2017, 03:18
autor: Seba
A dlaczego bez SSO?
Bez SSO to może być nawet dobrze, ale nie ma 2xWLC pod ręką. Rzuć okiem tutaj - http://www.cisco.com/c/en/us/td/docs/wi ... ity_DG.pdf

Re: HA SKU

: 29 cze 2017, 11:24
autor: PatrykW
Seba pisze:A dlaczego bez SSO?
Bez SSO to może być nawet dobrze, ale nie ma 2xWLC pod ręką. Rzuć okiem tutaj - http://www.cisco.com/c/en/us/td/docs/wi ... ity_DG.pdf
Brak licencji na SSO. Mam HA SKU.
Dokument ktory podeslales opisuje SSO.

Mam zupelnie inne outputy,
(Cisco Controller) >show redundancy summary
Redundancy Mode = SSO DISABLED
Local State = ACTIVE
Peer State = N/A
Unit = Secondary
Unit ID = xxxxxxxxxx
Redundancy State = N/A
Mobility MAC = xxxxxxxxxx
Czy unit nie powinno byc (Unit = Secondary - HA SKU)

I dunno hmm

Re: HA SKU

: 29 cze 2017, 11:49
autor: Seba
A pokaż cały output show redundancy summary

Podesłany dokument opisuje HA, w tym SSO, więc dotyka też Twojego scenariusza.

O jakiej licencji na SSO piszesz? Popraw mnie, ale kiedyś wystarczało albo na obu kontrolerach WLC 50 licencji na AP (i więcej) albo jeden z nich był właśnie HA SKU. Jakie masz te WLC, znaczy jakie mają licencje (show license summary)

Re: HA SKU

: 29 cze 2017, 19:21
autor: PatrykW
Seba pisze:A pokaż cały output show redundancy summary

Podesłany dokument opisuje HA, w tym SSO, więc dotyka też Twojego scenariusza.

O jakiej licencji na SSO piszesz? Popraw mnie, ale kiedyś wystarczało albo na obu kontrolerach WLC 50 licencji na AP (i więcej) albo jeden z nich był właśnie HA SKU. Jakie masz te WLC, znaczy jakie mają licencje (show license summary)
OS: 8.0.140.0
Platforma 5508

To jest z SECONDARY, czyli ten ktory ma byc HA SKU
(Cisco Controller) >show license summary

License Store: Primary License Storage
StoreIndex: 0 Feature: base Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Count: 500 / 0 (Active/In-use)
License Priority: None
A to jest z PRIMARY
(Cisco Controller) >show license summary

License Store: Primary License Storage
StoreIndex: 0 Feature: base Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 1 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 25 /25 (Active/In-use)
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 2 Feature: data_encryption Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Evaluation

--More-- or (q)uit
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 0 minute 0 second
License Count: 500 / 0 (Active/In-use)
License Priority: Low