Gdzie jesteś mój WLC'ku? :(
: 19 sty 2018, 11:26
Panowie,
jeśli podłączam nowego AP (czysta konfiguracja) to rozumiem że primary i secendary WLC powinien wpsiac się automatycznie na AP? Dajcie znac jak to rozumeicie.
Mam skonfigurowanego DHCP:
ip dhcp pool WLAN
network 10.240.1.0 255.255.255.0
default-router 10.240.1.254
dns-server 192.168.191.37 192.168.191.38 192.168.191.41
option 43 hex f108.0af0.01fc.0af0.01fd
option 60 ascii "Cisco AP c702"
podpinam AP i:
AP44ad.d936.03ec#show capwap client config
configMagicMark 0xF1E2D3C4
chkSumV2 19313
chkSumV1 49471
swVer 8.5.105.0
adminState ADMIN_ENABLED(1)
name AP44ad.d936.03ec
location default location
group name
mwarName
mwarIPAddress 0.0.0.0 -> tutaj powinien mi sie pojawic automatycznie adres WLC czy dopiero jak dodam statycznie?
mwarName
mwarIPAddress 0.0.0.0 -> tutaj powinien mi sie pojawic automatycznie adres WLC czy dopiero jak dodam statycznie
mwarName
mwarIPAddress 0.0.0.0
ssh status Disabled
ssh config mode GLOBAL
Telnet status Disabled
telnet config mode GLOBAL
numOfSlots 2
spamRebootOnAssert 1
spamStatTimer 180
randSeed 0xCE9C
transport SPAM_TRANSPORT_L3(2)
transportCfg SPAM_TRANSPORT_DEFAULT(0)
initialisation SPAM_PRODUCTION_DISCOVERY(1)
ApMode Local
ApSubMode Not Configured
Link-Encryption Disabled
Unencrypted Data Keep Alive Enabled
Hyperlocation admin Disabled
Mwar DTLS Capability Disabled
AP Rogue Detection Mode Enabled
OfficeExtend AP [0] Disabled
OfficeExtend AP JoinMode[0] Standard
Discovery Timer 10 secs
Heart Beat Timer 30 secs
Led State Enabled 1
Primed Interval 0
Syslog server 255.255.255.255
Prefer-mode IPv4
AP ILP Pre-Standard Switch Support Disabled
AP Power Injector Disabled
Infrastructure MFP validation Disabled
Configured Switch 1 Addr 10.240.1.253
logi:
*Mar 1 00:01:27.907: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:28.931: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:28.935: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:05.463: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:10.711: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.240.1.93, mask 255.255.255.0, hostname AP44ad.d936.03ec
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.191.37) (192.168.191.38)
*Mar 1 00:02:16.471: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.240.1.252 obtained through DHCP
*Mar 1 00:02:16.471: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.240.1.253 obtained through DHCP
Widać ze otrzymuje poprawny adres oraz poprawne adresy WLC... to dlaczego on ich nie dodaje?
jeśli podłączam nowego AP (czysta konfiguracja) to rozumiem że primary i secendary WLC powinien wpsiac się automatycznie na AP? Dajcie znac jak to rozumeicie.
Mam skonfigurowanego DHCP:
ip dhcp pool WLAN
network 10.240.1.0 255.255.255.0
default-router 10.240.1.254
dns-server 192.168.191.37 192.168.191.38 192.168.191.41
option 43 hex f108.0af0.01fc.0af0.01fd
option 60 ascii "Cisco AP c702"
podpinam AP i:
AP44ad.d936.03ec#show capwap client config
configMagicMark 0xF1E2D3C4
chkSumV2 19313
chkSumV1 49471
swVer 8.5.105.0
adminState ADMIN_ENABLED(1)
name AP44ad.d936.03ec
location default location
group name
mwarName
mwarIPAddress 0.0.0.0 -> tutaj powinien mi sie pojawic automatycznie adres WLC czy dopiero jak dodam statycznie?
mwarName
mwarIPAddress 0.0.0.0 -> tutaj powinien mi sie pojawic automatycznie adres WLC czy dopiero jak dodam statycznie
mwarName
mwarIPAddress 0.0.0.0
ssh status Disabled
ssh config mode GLOBAL
Telnet status Disabled
telnet config mode GLOBAL
numOfSlots 2
spamRebootOnAssert 1
spamStatTimer 180
randSeed 0xCE9C
transport SPAM_TRANSPORT_L3(2)
transportCfg SPAM_TRANSPORT_DEFAULT(0)
initialisation SPAM_PRODUCTION_DISCOVERY(1)
ApMode Local
ApSubMode Not Configured
Link-Encryption Disabled
Unencrypted Data Keep Alive Enabled
Hyperlocation admin Disabled
Mwar DTLS Capability Disabled
AP Rogue Detection Mode Enabled
OfficeExtend AP [0] Disabled
OfficeExtend AP JoinMode[0] Standard
Discovery Timer 10 secs
Heart Beat Timer 30 secs
Led State Enabled 1
Primed Interval 0
Syslog server 255.255.255.255
Prefer-mode IPv4
AP ILP Pre-Standard Switch Support Disabled
AP Power Injector Disabled
Infrastructure MFP validation Disabled
Configured Switch 1 Addr 10.240.1.253
logi:
*Mar 1 00:01:27.907: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:28.931: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:28.935: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:05.463: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:10.711: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.240.1.93, mask 255.255.255.0, hostname AP44ad.d936.03ec
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.191.37) (192.168.191.38)
*Mar 1 00:02:16.471: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.240.1.252 obtained through DHCP
*Mar 1 00:02:16.471: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.240.1.253 obtained through DHCP
Widać ze otrzymuje poprawny adres oraz poprawne adresy WLC... to dlaczego on ich nie dodaje?