Cisco 1542I - E nie laczy sie z WLC

Wszystko co się wiąże z technologiami bezprzewodowymi
Wiadomość
Autor
Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 262
Rejestracja: 16 maja 2014, 18:35

Cisco 1542I - E nie laczy sie z WLC

#1

#1 Post autor: qligowski »

Czesc, mam problem z AP ktory nie chce sie polaczyc z kontrolerem, probowalem juz wszystkiego. Niestety nie mam fizycznego dostepu do AP (jest w innym kraju) ale po ustawieniu option 43 w lokalnym DHCP inne AP bez problemu lacza sie z tym kontrolerem. AP jest supportowane takze przez vWLC.
Nie wiem co znaczy ten log 'Radius authorization of the AP has failed'. Probowalem manualnie dodac MAC do policy ale nic nie dziala.

Kod: Zaznacz cały

(Cisco Controller) show>ap join stats detailed 70:6d:15:15:a0:e0

Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable

Discovery phase statistics
- Discovery requests received.............................. 34
- Successful discovery responses sent...................... 34
- Unsuccessful discovery request processing................ 0
- Reason for last unsuccessful discovery attempt........... Not applicable
- Time at last successful discovery attempt................ Dec 03 16:34:07.524
- Time at last unsuccessful discovery attempt.............. Not applicable

Join phase statistics
- Join requests received................................... 18
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 36
- Reason for last unsuccessful join attempt................ Radius authorization of the AP has failed
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Dec 03 16:31:04.588

Configuration phase statistics

--More-- or (q)uit
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... Not applicable

Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable

Last AP disconnect details
- Reason for last AP connection failure....................[b] Radius authorization of the AP has failed[/b]
- Last AP disconnect reason................................ Not applicable

Last join error summary
- Type of error that occurred last......................... Unsuccessful Lwapp join response sent
- Reason for error that occurred last...................... [b]Radius authorization of the AP has failed[/b]
- Time at which the last join error occurred............... Dec 03 16:31:04.588

AP disconnect details
- Reason for last AP connection failure.................... [b]Radius authorization of the AP has failed[/b]
                                                                                                      Ethernet Mac : 70:6d:15:15:a0:e0  Ip Address : 10.110.120.80

mmoryto
wannabe
wannabe
Posty: 194
Rejestracja: 18 lut 2011, 12:28
Lokalizacja: Kanada

Re: Cisco 1542I - E nie laczy sie z WLC

#2

#2 Post autor: mmoryto »

Inne AP, które działają to też 1542?

Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 262
Rejestracja: 16 maja 2014, 18:35

Re: Cisco 1542I - E nie laczy sie z WLC

#3

#3 Post autor: qligowski »

Mix 1700, 2800 i 1532, 1542 jest jedne, ale na 100% compatbilne z kontrolerem i ta sama regulatory domain.

piotro
wannabe
wannabe
Posty: 402
Rejestracja: 07 paź 2005, 12:50

Re: Cisco 1542I - E nie laczy sie z WLC

#4

#4 Post autor: piotro »

Jaka wersja softu na WLC?
Zakladam, ze kraj to nie Costa Rica? ;):
https://bst.cloudapps.cisco.com/bugsear ... CSCvg34502

Na pewno cli na tym AP pokazuje ten sam kraj, co na WLC?
Masz wlaczone czy wylaczone na WLC: security > AP policies -> authorize MIC APs against auth-list or AAA ?

Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 262
Rejestracja: 16 maja 2014, 18:35

Re: Cisco 1542I - E nie laczy sie z WLC

#5

#5 Post autor: qligowski »

Wylaczone, kraj jest inny niz WLC ale inne AP dziala z tego samego kraju - WLC jest w UK a AP w Holandii. Czy country code w ogole jest brany pod uwage czy tylko samo regulatory domain? Tak , ta opcja jest wylaczona.

psles
wannabe
wannabe
Posty: 143
Rejestracja: 04 sie 2011, 06:09
Lokalizacja: Gdynia

Re: Cisco 1542I - E nie laczy sie z WLC

#6

#6 Post autor: psles »

A tak podstawowo sprawdziłeś rozbieżność czasu? Może jest za duża między ap i kontrolerem
.ılı..ılı.

mmoryto
wannabe
wannabe
Posty: 194
Rejestracja: 18 lut 2011, 12:28
Lokalizacja: Kanada

Re: Cisco 1542I - E nie laczy sie z WLC

#7

#7 Post autor: mmoryto »

Sprawdź poniższe na kontrolerze:
Secuirty -> AAA -> AP policies -> Authorize MIC APs against auth-list or AAA (powinno być odznaczone)

Ewentualnie możesz sprawdzić czy dodanie MAC'a AP do poniższego coś zmienia.
Secuirty -> AAA -> AP policies -> Add

Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 262
Rejestracja: 16 maja 2014, 18:35

Re: Cisco 1542I - E nie laczy sie z WLC

#8

#8 Post autor: qligowski »

Tak wszystko podoznaczane, czas sie zgadza, MAC address dodany.

Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 262
Rejestracja: 16 maja 2014, 18:35

Re: Cisco 1542I - E nie laczy sie z WLC

#9

#9 Post autor: qligowski »

OK naprawione - 8.5.105 ma bug i trzeba bylo dodac ethernet MAC address przez SSH /CLI zamiast zakladke AP policies w GUI. AP automatycznie sie polaczyly - moze komus sie to przyda.

ODPOWIEDZ