Lab idzie pod mlotek

kupie, sprzedam itp
Zablokowany
Wiadomość
Autor
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

Lab idzie pod mlotek

#1

#1 Post autor: drake »

Witam,
krotko i rzeczowo, jak w temacie:

Catalyst 2924XL-EN 350 PLN
Catalyst 2950 1250 PLN (2x 100FX uplinks, nie testowane, ale powinny byc sprawne)
Cisco 2503 (16/8MB) 170 PLN
Cisco 2501 (16/8MB) 150 PLN
Cisco 2511 (16/8MB) + 1x Octal Cable 870 PLN
Cisco 2521 (8/16MB) 250 PLN
Cisco 2611 (64/16MB) +WIC-1T,1BRI-S/T 650 PLN
Cisco 2611 (32/16MB) +WIC-1T,1BRI-S/T 550 PLN
Cisco 2610 (32/16MB) +WIC-2T 380 PLN

KABLE:

WIC-2T <-> DB-60 (zlepa 2 kabli) 55 PLN/szt. (1 szt.)
DB-60 <-> DB-60 30 PLN /szt. (4 szt.)
DB-60 <-> X.21 (meski) 10 PLN lub gratis jako dodatek
Symulator ISDN (Eumex 322) 110 PLN
Transceiver AUI/10Base-T 35 PLN/szt. (3 szt.)

Odbior osobisty w Szczecinie / + cena za przesylke.

Ponizej info bardziej szczegolowe:

--------------------
Catalyst 2924XL-EN
--------------------

Sw_2924#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-H2-M), Version 11.2(8.2)SA6, MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 23-Jun-99 17:56 by boba
Image text-base: 0x00003000, data-base: 0x0020DB0C

ROM: Bootstrap program is C2900XL boot loader

Sw_2924 uptime is 13 minutes
System restarted by power-on
System image file is "flash:c2900XL-h2-mz-112.8.2-SA6.bin", booted via


cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID 0x0E, with hardware revision 0x01
Last reset from power-on

Processor is running Standard Edition Software
Cluster member switch capable
24 Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.


--------------------
Catalyst 2950
--------------------

SW2950>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 21-Oct-05 02:22 by yenanh
Image text-base: 0x80010000, data-base: 0x80676000

ROM: Bootstrap program is C2950 boot loader

SW2950 uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA6.bin"

cisco WS-C2950C-24 (RC32300) processor (revision B0) with 19973K bytes of memory.

SW2950>sh inventory
NAME: "SW2950", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports and 2 100BASE-FX uplink ports"
PID: WS-C2950C-24



--------------------
Cisco 2503 16/8MB
--------------------


R2503#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(26), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 16-Oct-04 02:44 by cmong
Image text-base: 0x03042000, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

R2503 uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2500-i-l.121-26.bin"

cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 20387334, with hardware revision 00000001

Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102



--------------------
Cisco 2501 16/8MB
--------------------

R2501#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(26), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 16-Oct-04 02:44 by cmong
Image text-base: 0x03042000, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)

R2501 uptime is 1 minute

System returned to ROM by power-on
System image file is "flash:c2500-i-l.121-26.bin"

cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory.
Processor board ID 05265954, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102



--------------------
Cisco 2511 16/8MB + 1x Octal Cable
--------------------

R2511#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(26), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 16-Oct-04 02:44 by cmong
Image text-base: 0x03042000, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)

R2511 uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2500-i-l.121-26.bin"


cisco 2511 (68030) processor (revision D) with 16384K/2048K bytes of memory.

Processor board ID 04817964, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102



--------------------
Cisco 2521 8/16MB
--------------------

2521#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(16), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 03-Mar-01 04:31 by dchih
Image text-base: 0x0303E1E4, data-base: 0x00001000


ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

2521 uptime is 2 minutes
System restarted by power-on
System image file is "flash:c2500-is-l_120-16"

cisco 2521 (68030) processor (revision K) with 6144K/2048K bytes of memory.
Processor board ID 08386851, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
2 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash partition 1 (Read ONLY)
8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0x2102



--------------------
Cisco 2611 64/16MB (WIC-1T & 1BRI-S/T na pokladzie)
--------------------

2611#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(3a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Wed 15-Oct-03 06:38 by dchih
Image text-base: 0x80008098, data-base: 0x819AFDB8


ROM: System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)

2611 uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-3A.bin"


cisco 2611 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of memory.
Processor board ID JAD062805FQ (241140738)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



--------------------
Cisco 2611 32/16MB (WIC-1T & 1BRI-S/T na pokladzie)
--------------------

2611#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(3a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Wed 15-Oct-03 06:38 by dchih
Image text-base: 0x80008098, data-base: 0x819AFDB8


ROM: System Bootstrap, Version 12.2(6r), RELEASE SOFTWARE (fc1)

2611 uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-bin-mz.122-11.T.bin"

cisco 2611 (MPC860) processor (revision 0x00) with 28672K/4096K bytes of memory.
Processor board ID JAD062805CO (2300059681)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



--------------------
Cisco 2610 32/16MB (WIC-2T na pokladzie)
--------------------

2610#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-BIN-M), Version 12.2(11)T, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Thu 01-Aug-02 14:57 by ccai
Image text-base: 0x8000809C, data-base: 0x80B59AB4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

2610 uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-bin-mz.122-11.T.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.
Processor board ID JAD0420076H (2885181566)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



Pozdruffka!
Never stop exploring :)

https://iverion.de
Na górę
AndyZ
member
member
Posty: 44
Rejestracja: 01 kwie 2006, 15:32

Re: Lab idzie pod mlotek

#2

#2 Post autor: AndyZ »

Witam!
drake pisze:Witam,
krotko i rzeczowo, jak w temacie:

Symulator ISDN (Eumex 322) 110 PLN
Pozdruffka!
Zaklepuję ten symulator :)

AndyZ
Na górę
Victor
member
member
Posty: 28
Rejestracja: 20 maja 2007, 16:27

Re: Lab idzie pod mlotek

#3

#3 Post autor: Victor »

drake pisze: WIC-2T <-> DB-60 (zlepa 2 kabli) 55 PLN/szt. (1 szt.)
Wstępnie zaklepuje.
Na górę
docent102
newbie
newbie
Posty: 1
Rejestracja: 13 cze 2007, 10:12

#4

#4 Post autor: docent102 »

Cisco 2503 (16/8MB) + Transceiver AUI/10Base-T + DB-60 <-> DB-60

Wstępnie zaklepuje
Na górę
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

#5

#5 Post autor: drake »

Dwa Transceivery AUI/10Base-T zaklepane dla 'Nowy' via PM.

Zostaly:

Catalyst 2924XL-EN 350 PLN
Catalyst 2950 1250 PLN
Cisco 2501 (16/8MB) 150 PLN
Cisco 2511 (16/8MB) + 1x Octal Cable 870 PLN
Cisco 2521 (8/16MB) 250 PLN
Cisco 2611 (64/16MB) +WIC-1T,1BRI-S/T 650 PLN
Cisco 2611 (32/16MB) +WIC-1T,1BRI-S/T 550 PLN
Cisco 2610 (32/16MB) +WIC-2T 380 PLN

KABLE:

DB-60 <-> DB-60 30 PLN /szt. (3 szt.)
DB-60 <-> X.21 (meski) 10 PLN lub gratis jako dodatek
Never stop exploring :)

https://iverion.de
Na górę
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

#6

#6 Post autor: drake »

Ok, poki co sprzedaz wstrzymana do jutra, jest kolega ktory chce kupic reszte w calosci.

Pozdrawiam!
drake
Never stop exploring :)

https://iverion.de
Na górę
dzwiedz
member
member
Posty: 35
Rejestracja: 13 sty 2007, 12:18
Lokalizacja: Miętne\W-wa

Lab idzie pod mlotek

#7

#7 Post autor: dzwiedz »

wysłałem wiadomość na peema:)
Pozdrawiam
Paweł R. vel dźwiedź
Na górę
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

#8

#8 Post autor: drake »

Ok, kolega jednak zrezygnowal, zatem w dalszym ciagu na sprzedaz sa:

Catalyst 2950
Cisco 2501 (16/8MB)
Cisco 2511 (16/8MB) + 1x Octal Cable
Cisco 2521 (8/16MB)
Cisco 2611 (64/16MB) +WIC-1T,1BRI-S/T
Cisco 2611 (32/16MB) +WIC-1T,1BRI-S/T

KABLE:

DB-60 <-> WIC-2T - jeden kabel spiety z dwoch, z jednej strony pojedyncza wtyczka SS, z drugiej pojedyncza db60
DB-60 <-> DB-60 - 3 szt.
DB-60 <-> X.21 (meski)
Never stop exploring :)

https://iverion.de
Na górę
Awatar użytkownika
d1gital
wannabe
wannabe
Posty: 77
Rejestracja: 26 kwie 2007, 20:53
Lokalizacja: Łódź, Polska

#9

#9 Post autor: d1gital »

drake pisze: Cisco 2511 (16/8MB) + 1x Octal Cable
Oficjalnie oświadczam, że biorę, co do szczegółów napisałem PM.
B.
Na górę
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

#10

#10 Post autor: drake »

Zostaly:

Catalyst 2950
Cisco 2501 (16/8MB)
Cisco 2521 (8/16MB)
Cisco 2611 (64/16MB) +WIC-1T,1BRI-S/T
Cisco 2611 (32/16MB) +WIC-1T,1BRI-S/T

KABLE:

DB-60 <-> DB-60 - 3 szt.
DB-60 <-> X.21 (meski)
Never stop exploring :)

https://iverion.de
Na górę
Awatar użytkownika
drake
CCIE
CCIE
Posty: 1593
Rejestracja: 06 maja 2005, 01:32
Lokalizacja: Dortmund, DE
Kontakt:
Skontaktuj się z drake

#11

#11 Post autor: drake »

Kable poszly w calosci, zostaly juz tylko routery i switch.
Never stop exploring :)

https://iverion.de
Na górę
Zablokowany

Wróć do „Bazar”