Cisco 1920 + ADSL PPPoA ATM down down

Problemy związane z routingiem

Moderatorzy: mikrobi, garfield, gangrena, Seba, aron

Wiadomość
Autor
Awatar użytkownika
qligowski
wannabe
wannabe
Posty: 244
Rejestracja: 16 maja 2014, 18:35

Cisco 1920 + ADSL PPPoA ATM down down

#1

#1 Post autor: qligowski » 01 lip 2020, 09:01

Witam,

Wymienilem ostatnio stary router (Draytek Vigor 2850) ktory byl podlaczony do linii ADSL2+ G.992.5 na Cisco 1920 z karta ADSL (Alcatel). Za nic nie potrafie podniesc interfejsu ATM 0/0/0. Caly czas nie potrafi sie z synchornizowac z operatorem. Obecna konfiguracja ATM 0/0/0:

Kod: Zaznacz cały

interface ATM0/0/0
 no ip address
 no atm ilmi-keepalive
 pvc 0/38
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
end
oraz Logi debug atm:

Kod: Zaznacz cały

*Jun 30 15:40:13.087: DSL(ATM0/0/0): 13: Modem state = 0x8
*Jun 30 15:40:15.587: DSL(ATM0/0/0): 14: Modem state = 0x8
*Jun 30 15:40:18.087: DSL(ATM0/0/0): 15: Modem state = 0x8
*Jun 30 15:40:20.587: DSL(ATM0/0/0): 16: Modem state = 0x8
*Jun 30 15:40:23.087: DSL(ATM0/0/0): 17: Modem state = 0x8
*Jun 30 15:40:25.587: DSL(ATM0/0/0): 18: Modem state = 0x8
*Jun 30 15:40:28.087: DSL(ATM0/0/0): 19: Modem state = 0x8
*Jun 30 15:40:30.587: DSL(ATM0/0/0): 20: Modem state = 0x8
*Jun 30 15:40:33.087: DSL(ATM0/0/0): 21: Modem state = 0x8
*Jun 30 15:40:35.587: DSL(ATM0/0/0): 22: Modem state = 0x8
*Jun 30 15:40:38.087: DSL(ATM0/0/0): 23: Modem state = 0x8
*Jun 30 15:40:40.587: DSL(ATM0/0/0): 24: Modem state = 0x8
*Jun 30 15:40:43.087: DSL(ATM0/0/0): 25: Modem state = 0x8
*Jun 30 15:40:45.587: DSL(ATM0/0/0): 26: Modem state = 0x8
*Jun 30 15:40:48.087: DSL(ATM0/0/0): 27: Modem state = 0x8
*Jun 30 15:40:50.587: DSL(ATM0/0/0): 28: Modem state = 0x8
*Jun 30 15:40:53.087: DSL(ATM0/0/0): 29: Modem state = 0x8
*Jun 30 15:40:55.587: DSL(ATM0/0/0): 30: Modem state = 0x8
*Jun 30 15:40:58.087: DSL(ATM0/0/0): Could not establish connection event=1
*Jun 30 15:40:58.087: DSL: SM: [DMTDSL_DO_OPEN -> DMTDSL_INIT]
*Jun 30 15:40:58.115: DSL: SM: [DMTDSL_INIT -> DMTDSL_DLOAD_1]
*Jun 30 15:40:58.115: DSL(ATM0/0/0): Downloading init_AMR-4.0.015_no_bist.bin
*Jun 30 15:40:58.115: DSL:(ATM0/0/0) Downloaded 2 blocks... Finished!
*Jun 30 15:40:58.115: DSL(ATM0/0/0): Sent command 0x14
*Jun 30 15:41:00.115: DSL(ATM0/0/0): Received response: 0x80
*Jun 30 15:41:00.115: DSL: SM: [DMTDSL_DLOAD_1 -> DMTDSL_DLOAD_2]
*Jun 30 15:41:00.115: DSL(ATM0/0/0): Downloading AMR-4.0.015.bin
*Jun 30 15:41:00.155: DSL(ATM0/0/0): Downloaded 100 blocks
*Jun 30 15:41:00.199: DSL(ATM0/0/0): Downloaded 200 blocks
*Jun 30 15:41:00.243: DSL(ATM0/0/0): Downloaded 300 blocks
*Jun 30 15:41:00.287: DSL(ATM0/0/0): Downloaded 400 blocks
*Jun 30 15:41:00.331: DSL(ATM0/0/0): Downloaded 500 blocks
*Jun 30 15:41:00.375: DSL(ATM0/0/0): Downloaded 600 blocks
*Jun 30 15:41:00.419: DSL(ATM0/0/0): Downloaded 700 blocks
*Jun 30 15:41:00.463: DSL(ATM0/0/0): Downloaded 800 blocks
*Jun 30 15:41:00.503: DSL(ATM0/0/0): Downloaded 900 blocks
*Jun 30 15:41:00.547: DSL(ATM0/0/0): Downloaded 1000 blocks
*Jun 30 15:41:00.591: DSL(ATM0/0/0): Downloaded 1100 blocks
*Jun 30 15:41:00.635: DSL(ATM0/0/0): Downloaded 1200 blocks
*Jun 30 15:41:00.679: DSL(ATM0/0/0): Downloaded 1300 blocks
*Jun 30 15:41:00.723: DSL(ATM0/0/0): Downloaded 1400 blocks
*Jun 30 15:41:00.763: DSL(ATM0/0/0): Downloaded 1500 blocks
*Jun 30 15:41:00.807: DSL(ATM0/0/0): Downloaded 1600 blocks
*Jun 30 15:41:00.851: DSL(ATM0/0/0): Downloaded 1700 blocks
*Jun 30 15:41:00.895: DSL(ATM0/0/0): Downloaded 1800 blocks
*Jun 30 15:41:00.939: DSL(ATM0/0/0): Downloaded 1900 blocks
*Jun 30 15:41:00.983: DSL(ATM0/0/0): Downloaded 2000 blocks
*Jun 30 15:41:01.027: DSL(ATM0/0/0): Downloaded 2100 blocks
*Jun 30 15:41:01.071: DSL(ATM0/0/0): Downloaded 2200 blocks
*Jun 30 15:41:01.111: DSL(ATM0/0/0): Downloaded 2300 blocks
*Jun 30 15:41:01.155: DSL(ATM0/0/0): Downloaded 2400 blocks
*Jun 30 15:41:01.199: DSL(ATM0/0/0): Downloaded 2500 blocks
*Jun 30 15:41:01.247: DSL(ATM0/0/0): Downloaded 2600 blocks
*Jun 30 15:41:01.287: DSL(ATM0/0/0): Downloaded 2700 blocks
*Jun 30 15:41:01.331: DSL(ATM0/0/0): Downloaded 2800 blocks
*Jun 30 15:41:01.375: DSL(ATM0/0/0): Downloaded 2900 blocks
*Jun 30 15:41:01.419: DSL(ATM0/0/0): Downloaded 3000 blocks
*Jun 30 15:41:01.463: DSL(ATM0/0/0): Downloaded 3100 blocks
*Jun 30 15:41:01.507: DSL(ATM0/0/0): Downloaded 3200 blocks
*Jun 30 15:41:01.551: DSL(ATM0/0/0): Downloaded 3300 blocks
*Jun 30 15:41:01.595: DSL(ATM0/0/0): Downloaded 3400 blocks
*Jun 30 15:41:01.635: DSL(ATM0/0/0): Downloaded 3500 blocks
*Jun 30 15:41:01.679: DSL(ATM0/0/0): Downloaded 3600 blocks
*Jun 30 15:41:01.723: DSL(ATM0/0/0): Downloaded 3700 blocks
*Jun 30 15:41:01.767: DSL(ATM0/0/0): Downloaded 3800 blocks
*Jun 30 15:41:01.811: DSL(ATM0/0/0): Downloaded 3900 blocks
*Jun 30 15:41:01.855: DSL(ATM0/0/0): Downloaded 4000 blocks
*Jun 30 15:41:01.899: DSL(ATM0/0/0): Downloaded 4100 blocks
*Jun 30 15:41:01.903: DSL:(ATM0/0/0) Downloaded 4116 blocks... Finished!
*Jun 30 15:41:01.903: DSL(ATM0/0/0): Sent command 0x14
*Jun 30 15:41:03.903: set tx_gain_offset to 0
*Jun 30 15:41:03.903: set rx_gain_offset to 0
*Jun 30 15:41:03.903: set target_noise_margin_offset to 0
*Jun 30 15:41:03.903: set max_bits_tone_limit to 15
*Jun 30 15:41:03.903: changed current state to do open!!
*Jun 30 15:41:03.903: DSL: SM: [DMTDSL_DLOAD_2 -> DMTDSL_DO_OPEN]
*Jun 30 15:41:03.903: DSL(ATM0/0/0): Send ADSL_OPEN command.
*Jun 30 15:41:03.903: dslsar enable ATM0/0/0

*Jun 30 15:41:03.903: DSL(ATM0/0/0): Using preferred open mode 1
*Jun 30 15:41:03.903: DSL(ATM0/0/0): Using ITU sync first for 5 secs, then ANSI/ITU sync alternatively for 2 secs
*Jun 30 15:41:03.903: DSL(ATM0/0/0): Using subfunction 0x0
*Jun 30 15:41:03.903: LOCAL:Max noise margin for power cutoff 31
*Jun 30 15:41:03.903: DSL(ATM0/0/0): GPCI[0] 0x5
*Jun 30 15:41:03.903: DSL(ATM0/0/0): GPCI[1] 0x19
*Jun 30 15:41:03.903: DSL(ATM0/0/0): GPCI[2] 0x11
*Jun 30 15:41:03.903: DSL(ATM0/0/0): GPCI[3] 0x0
*Jun 30 15:41:03.903: DSL(ATM0/0/0): Sent extended command 0x3
*Jun 30 15:41:06.403: DSL(ATM0/0/0): 1: Modem state = 0x8
*Jun 30 15:41:08.903: DSL(ATM0/0/0): 2: Modem state = 0x8
*Jun 30 15:41:11.403: DSL(ATM0/0/0): 3: Modem state = 0x8
*Jun 30 15:41:13.903: DSL(ATM0/0/0): 4: Modem state = 0x8
*Jun 30 15:41:16.403: DSL(ATM0/0/0): 5: Modem state = 0x8
*Jun 30 15:41:18.903: DSL(ATM0/0/0): 6: Modem state = 0x8
*Jun 30 15:41:21.403: DSL(ATM0/0/0): 7: Modem state = 0x8
*Jun 30 15:41:23.903: DSL(ATM0/0/0): 8: Modem state = 0x8
*Jun 30 15:41:26.403: DSL(ATM0/0/0): 9: Modem state = 0x8
*Jun 30 15:41:28.903: DSL(ATM0/0/0): 10: Modem state = 0x8
*Jun 30 15:41:31.403: DSL(ATM0/0/0): 11: Modem state = 0x8
*Jun 30 15:41:33.903: DSL(ATM0/0/0): 12: Modem state = 0x8
*Jun 30 15:41:36.403: DSL(ATM0/0/0): 13: Modem state = 0x8
*Jun 30 15:41:38.903: DSL(ATM0/0/0): 14: Modem state = 0x8
*Jun 30 15:41:41.403: DSL(ATM0/0/0): 15: Modem state = 0x8
*Jun 30 15:41:43.903: DSL(ATM0/0/0): 16: Modem state = 0x8
*Jun 30 15:41:46.403: DSL(ATM0/0/0): 17: Modem state = 0x8
*Jun 30 15:41:48.903: DSL(ATM0/0/0): 18: Modem state = 0x8
*Jun 30 15:41:51.403: DSL(ATM0/0/0): 19: Modem state = 0x8
*Jun 30 15:41:53.903: DSL(ATM0/0/0): 20: Modem state = 0x8
*Jun 30 15:41:56.403: DSL(ATM0/0/0): 21: Modem state = 0x8
*Jun 30 15:41:58.903: DSL(ATM0/0/0): 22: Modem state = 0x8
*Jun 30 15:42:01.403: DSL(ATM0/0/0): 23: Modem state = 0x8

ODPOWIEDZ